topic Re: A question on IDS ver 5 in Network Security https://community.cisco.com/t5/network-security/a-question-on-ids-ver-5/m-p/453035#M100347 <HTML><HEAD></HEAD><BODY><P>All informaton relavant to IPS 5.0 is available in the following URL,</P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids11/cliguide/index.htm" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids11/cliguide/index.htm</A></P></BODY></HTML> Fri, 15 Jul 2005 13:35:50 GMT beth-martin 2005-07-15T13:35:50Z A question on IDS ver 5 https://community.cisco.com/t5/network-security/a-question-on-ids-ver-5/m-p/453034#M100346 <P>I have just upgraded a 4215 sensor to ver 5, it was a replacement so I started afresh. I ran the setup and then entered IDM, under Interfaces I can only see one I/F fa0/1 the management I/F the monitoring doesn't appear, I have re-checked the sensors setup and can see the I/F's from the CLI any ideas where I'm going wrong.</P><P>Also any idea how I verify that the sensor is able to communicate with the Pix I have entered the details but there seems no way of confirming connectivity (In Ver 3 there was conformation that the two were talking)</P><P>Thanks</P><P></P><P>Mark </P> Sun, 10 Mar 2019 09:32:02 GMT https://community.cisco.com/t5/network-security/a-question-on-ids-ver-5/m-p/453034#M100346 markb 2019-03-10T09:32:02Z Re: A question on IDS ver 5 https://community.cisco.com/t5/network-security/a-question-on-ids-ver-5/m-p/453035#M100347 <HTML><HEAD></HEAD><BODY><P>All informaton relavant to IPS 5.0 is available in the following URL,</P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids11/cliguide/index.htm" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids11/cliguide/index.htm</A></P></BODY></HTML> Fri, 15 Jul 2005 13:35:50 GMT https://community.cisco.com/t5/network-security/a-question-on-ids-ver-5/m-p/453035#M100347 beth-martin 2005-07-15T13:35:50Z