https://community.cisco.com/t5/network-security/pix-525-with-high-cpu-utilization/m-p/722789#M1004652 <HTML><HEAD></HEAD><BODY><P>Is SNMP configured on the PIX and are you using any monitoring software which connects to the pix via SNMP. What kind of logging is setup on the pix.</P><P></P></BODY></HTML> Wed, 16 May 2007 02:55:47 GMT zubairjalal 2007-05-16T02:55:47Z https://community.cisco.com/t5/network-security/pix-525-with-high-cpu-utilization/m-p/722788#M1004651 <P>Hi,</P><P>Have this issue that I need help with...</P><P>I have 2 525Pix's running 6.3(5) in failover...</P><P>The primary runs at a constant 60%-100% CPU usage and my inside and outside interfaces are running packet errors...</P><P>When show proc the only process' that is high is 557Poll, Pix/Inf1 and Pix/Inf3.</P><P>If I switch over to the standby the problem persists.</P><P></P><P>Thanks</P> Mon, 11 Mar 2019 10:14:33 GMT https://community.cisco.com/t5/network-security/pix-525-with-high-cpu-utilization/m-p/722788#M1004651 marius_vt 2019-03-11T10:14:33Z https://community.cisco.com/t5/network-security/pix-525-with-high-cpu-utilization/m-p/722789#M1004652 <HTML><HEAD></HEAD><BODY><P>Is SNMP configured on the PIX and are you using any monitoring software which connects to the pix via SNMP. What kind of logging is setup on the pix.</P><P></P></BODY></HTML> Wed, 16 May 2007 02:55:47 GMT https://community.cisco.com/t5/network-security/pix-525-with-high-cpu-utilization/m-p/722789#M1004652 zubairjalal 2007-05-16T02:55:47Z https://community.cisco.com/t5/network-security/pix-525-with-high-cpu-utilization/m-p/722790#M1004653 <HTML><HEAD></HEAD><BODY><P>Thanks for the reply...</P><P>Nope no SNMP or any logging is done on the PIX ....It has been disabled..</P></BODY></HTML> Wed, 16 May 2007 04:19:28 GMT https://community.cisco.com/t5/network-security/pix-525-with-high-cpu-utilization/m-p/722790#M1004653 marius_vt 2007-05-16T04:19:28Z