topic Re: 6513 FWSM Active / Active setup in Network Security https://community.cisco.com/t5/network-security/6513-fwsm-active-active-setup/m-p/803983#M1004747 <HTML><HEAD></HEAD><BODY><P>I have about 10 days till this network change. Feel free to email me sample configs to <A href="mailto:jim@razors-edge.org">jim@razors-edge.org</A></P><P></P><P></P></BODY></HTML> Fri, 11 May 2007 18:39:53 GMT jim 2007-05-11T18:39:53Z 6513 FWSM Active / Active setup https://community.cisco.com/t5/network-security/6513-fwsm-active-active-setup/m-p/803982#M1004744 <P>Im about to upgrade my firewall to 3.X from 2.x and in addition add a new 6513 core switch which also has a FWSM. </P><P></P><P>I want to set the 2nd 6513 FWSM in active active mode with the orginal switch.... Does anyone have a sample configuration for this? I have about 10 context firewalls configured on the original 6513 FWSM.</P><P></P><P></P><P>Ive done this on a pair of ASA's but never on FWSM running 3.x</P><P></P><P>Any help is appreciated.</P><P></P><P></P> Mon, 11 Mar 2019 10:12:56 GMT https://community.cisco.com/t5/network-security/6513-fwsm-active-active-setup/m-p/803982#M1004744 jim 2019-03-11T10:12:56Z Re: 6513 FWSM Active / Active setup https://community.cisco.com/t5/network-security/6513-fwsm-active-active-setup/m-p/803983#M1004747 <HTML><HEAD></HEAD><BODY><P>I have about 10 days till this network change. Feel free to email me sample configs to <A href="mailto:jim@razors-edge.org">jim@razors-edge.org</A></P><P></P><P></P></BODY></HTML> Fri, 11 May 2007 18:39:53 GMT https://community.cisco.com/t5/network-security/6513-fwsm-active-active-setup/m-p/803983#M1004747 jim 2007-05-11T18:39:53Z Re: 6513 FWSM Active / Active setup https://community.cisco.com/t5/network-security/6513-fwsm-active-active-setup/m-p/803984#M1004749 <HTML><HEAD></HEAD><BODY><P>Configuring Active/Active Failover</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/switches/ps708/products_module_configuration_guide_chapter09186a0080602f98.html#wp1046889" target="_blank">http://www.cisco.com/en/US/products/hw/switches/ps708/products_module_configuration_guide_chapter09186a0080602f98.html#wp1046889</A></P><P></P><P></P><P>Please rate if you are satisfied.</P><P></P><P>Cheers!</P></BODY></HTML> Sat, 12 May 2007 22:49:19 GMT https://community.cisco.com/t5/network-security/6513-fwsm-active-active-setup/m-p/803984#M1004749 joshua.walton 2007-05-12T22:49:19Z Re: 6513 FWSM Active / Active setup https://community.cisco.com/t5/network-security/6513-fwsm-active-active-setup/m-p/803985#M1004750 <HTML><HEAD></HEAD><BODY><P>Though I gave you five stars for a very helpful document. I was hoping for some example real world configurations I could reverse engineer for our enviornment. If anyone could lend some snippit configs I would appreciate it.</P><P></P></BODY></HTML> Mon, 14 May 2007 11:59:41 GMT https://community.cisco.com/t5/network-security/6513-fwsm-active-active-setup/m-p/803985#M1004750 jim 2007-05-14T11:59:41Z Re: 6513 FWSM Active / Active setup https://community.cisco.com/t5/network-security/6513-fwsm-active-active-setup/m-p/803986#M1004753 <HTML><HEAD></HEAD><BODY><P>Sorry, Ive never done this before either.</P><P></P><P>Sounds like fun! <span class="lia-unicode-emoji" title=":monkey_face:">🐵</span></P><P></P><P></P></BODY></HTML> Mon, 14 May 2007 12:28:50 GMT https://community.cisco.com/t5/network-security/6513-fwsm-active-active-setup/m-p/803986#M1004753 joshua.walton 2007-05-14T12:28:50Z