topic Re: bandwidth config in Network Security https://community.cisco.com/t5/network-security/bandwidth-config/m-p/787030#M1004981 <HTML><HEAD></HEAD><BODY><P>IOS router should do the trick. You can configure bandwidth restriction using the MQC.</P><P></P><P>Here's the MQC for 12.4.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hqos_c/part40/qctmcli2.htm" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hqos_c/part40/qctmcli2.htm</A></P></BODY></HTML> Fri, 11 May 2007 03:52:20 GMT palomoj 2007-05-11T03:52:20Z bandwidth config https://community.cisco.com/t5/network-security/bandwidth-config/m-p/787029#M1004978 <P>Hello,</P><P>Does anyone know if it is possible to configure bandwidth restriction on PIX 501 (or any PIX at all), router or a 3750 switch. Otherwise what software can anyone recommend. </P><P></P><P>Thanks</P> Mon, 11 Mar 2019 10:11:27 GMT https://community.cisco.com/t5/network-security/bandwidth-config/m-p/787029#M1004978 toyinsekoni 2019-03-11T10:11:27Z Re: bandwidth config https://community.cisco.com/t5/network-security/bandwidth-config/m-p/787030#M1004981 <HTML><HEAD></HEAD><BODY><P>IOS router should do the trick. You can configure bandwidth restriction using the MQC.</P><P></P><P>Here's the MQC for 12.4.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hqos_c/part40/qctmcli2.htm" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hqos_c/part40/qctmcli2.htm</A></P></BODY></HTML> Fri, 11 May 2007 03:52:20 GMT https://community.cisco.com/t5/network-security/bandwidth-config/m-p/787030#M1004981 palomoj 2007-05-11T03:52:20Z