Problem with FTD device PPPOE connection default route

mhmservice — Fri, 21 Feb 2020 16:07:10 GMT

Hi all

I have an ASA 5506X running the FTD image but im having issues with the default route. The device is running latest software 6.2.3.4 and managed by FMC running 6.2.3 also.

The internet connection is provided over PPPoE, with dynamic IP. I receive a dynamic IP OK but I don't get the default route. I can't configure this static because it is changing when the internet connection drops, firewall is rebooted, etc.

In the ASA there is an option in ASDM for "Obtain default route using PPPoE" but this option does not exist in the FMC. If I try to ping an internet ip e.g. 8.8.8.8 I get the error "no route to host"

Any help greatly appreciated as I cannot continue with my deployment

Re: Problem with FTD device PPPOE connection default route

mhmservice — Wed, 22 Aug 2018 08:13:40 GMT

fixed as per https://community.cisco.com/t5/security-analytics-and/pppoe-on-fmc/m-p/3691332

topic Problem with FTD device PPPOE connection default route in Network Security

Problem with FTD device PPPOE connection default route

Re: Problem with FTD device PPPOE connection default route