topic Re: ip inspect problem in Network Security https://community.cisco.com/t5/network-security/ip-inspect-problem/m-p/769644#M1005216 <HTML><HEAD></HEAD><BODY><P>This doesnt solve your problem, but I wanted to point it out.</P><P></P><P>Remove 'ip inspect dns-timeout 30' as this is synonymous with 'ip inspect name firewall udp' because when you inspect UDP, the UDP/53 falls into this category and the default UDP idle-timeout is 30 seconds.</P><P></P><P>Unless you increase/decrease the timeout value (in seconds) for 'dns-timeout,' you dont need the command.</P></BODY></HTML> Sat, 12 May 2007 23:45:48 GMT joshua.walton 2007-05-12T23:45:48Z ip inspect problem https://community.cisco.com/t5/network-security/ip-inspect-problem/m-p/769642#M1005214 <P>I have a problem with ip inspect on a C 827 router. </P><P></P><P>When i want make a connection to outbound it can not make a session with ip inspect firewall. When is use the command sh ip inspect session i don`t see details. If i disable access-list then everything works fine. </P><P></P><P>I hope sombody can help my. </P><P></P><P> </P><P></P> Mon, 11 Mar 2019 10:10:10 GMT https://community.cisco.com/t5/network-security/ip-inspect-problem/m-p/769642#M1005214 smartnet 2019-03-11T10:10:10Z Re: ip inspect problem https://community.cisco.com/t5/network-security/ip-inspect-problem/m-p/769643#M1005215 <HTML><HEAD></HEAD><BODY><P>I have make some test. When i do a telnet with ip-adres then works everything good. The problemen is with dns resolve and ip inspect. I have add# ip name-server X.X.X.X but is does helping. I hope somebody can help. </P><P></P><P></P></BODY></HTML> Thu, 10 May 2007 14:25:23 GMT https://community.cisco.com/t5/network-security/ip-inspect-problem/m-p/769643#M1005215 smartnet 2007-05-10T14:25:23Z Re: ip inspect problem https://community.cisco.com/t5/network-security/ip-inspect-problem/m-p/769644#M1005216 <HTML><HEAD></HEAD><BODY><P>This doesnt solve your problem, but I wanted to point it out.</P><P></P><P>Remove 'ip inspect dns-timeout 30' as this is synonymous with 'ip inspect name firewall udp' because when you inspect UDP, the UDP/53 falls into this category and the default UDP idle-timeout is 30 seconds.</P><P></P><P>Unless you increase/decrease the timeout value (in seconds) for 'dns-timeout,' you dont need the command.</P></BODY></HTML> Sat, 12 May 2007 23:45:48 GMT https://community.cisco.com/t5/network-security/ip-inspect-problem/m-p/769644#M1005216 joshua.walton 2007-05-12T23:45:48Z