PIX525 6.3 access-list changes

wilson_1234_2 — Mon, 11 Mar 2019 10:05:10 GMT

On a 525, in version 6.3, my understanding is that you cannot change an access-list per line as you can in 7.0 by line number.

Is it acceptable practice, if you want to add a line in the middle of an access-list to just copy the existing ACL from the config, add the line and paste the new ACL without deleting the existing one?

In other words you are just overwriting the existing ACL rather than deleting, then creating a new ACL with the new line.

Is there any danger in doing this on a production firewall?

Re: PIX525 6.3 access-list changes

Jon Marshall — Thu, 26 Apr 2007 19:37:59 GMT

You should be able to do this in Pix v6.3. See attached link for more details:

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727a3.html#wp1067755

HTH

Jon

topic Re: PIX525 6.3 access-list changes in Network Security

PIX525 6.3 access-list changes

Re: PIX525 6.3 access-list changes