topic Re: turn on logging/timestamping on vers 6.3.5 code in Network Security

turn on logging/timestamping on vers 6.3.5 code

dgalati000 — Mon, 11 Mar 2019 10:02:07 GMT

What is the syntax to turn on date and timestamp for logging console on this vers of code for a 506e? I have logging on, logging timestamp, logging buff debugg, date and time are correct...can't seem to get timestamp on the log enties.

Re: turn on logging/timestamping on vers 6.3.5 code

Jon Marshall — Mon, 23 Apr 2007 09:12:04 GMT

"Logging timestamp" shoud have done the trick. I just tested it in our lab : Pix 506E with 6.3(5)

Without timestamp:

Apr 23 10:38:59 10.228.53.195 ProdtoDTE %PIX-5-111008: User 'enable_15' executed the 'configure t' command

With timestamp:

Apr 23 10:39:18 10.228.53.195 Apr 23 2007 11:06:56 ProdtoDTE : %PIX-5-111008: User 'enable_15' executed the 'write mem' command.

Are you not seeing this ?

HTH

Jon

Re: turn on logging/timestamping on vers 6.3.5 code

dgalati000 — Mon, 23 Apr 2007 13:35:01 GMT

Jon, this is what I get. I turned logging on again >> logging on

logging timestamp

logging buffered debugging <<<<<<

502103: User priv level changed: Uname: dgalati From: 1 To: 15

111008: User 'dgalati' executed the 'enable' command.

710002: UDP access permitted from to

111001: Begin configuration: console writing to memory

111004: console end configuration: OK

111008: User 'dgalati' executed the 'write mem' command.

111009: User 'dgalati' executed cmd: show clock

111009: User 'dgalati' executed cmd: show logging

111007: Begin configuration: console reading from terminal

111008: User 'dgalati' executed the 'configure t' command.

111008: User 'dgalati' executed the 'clock set 10:30:20 23 April 2007' command.

111005: console end configuration: OK

111001: Begin configuration: console writing to memory

111004: console end configuration: OK

111008: User 'dgalati' executed the 'write mem' command.

providencefw#

Re: turn on logging/timestamping on vers 6.3.5 code

acomiskey — Mon, 23 Apr 2007 14:16:56 GMT

My experience is if you do a show run from the console the timestamps will not display, but if you look at the syslogs the timestamps will be there.

Re: turn on logging/timestamping on vers 6.3.5 code

dgalati000 — Mon, 23 Apr 2007 14:51:09 GMT

Hi, I won't see timestamps in the active mem (sh run) will I ?? I am NOT seeing them in my sh log via ssh. Haven't looked at the syslog server yet...thx.

Re: turn on logging/timestamping on vers 6.3.5 code

acomiskey — Mon, 23 Apr 2007 14:56:09 GMT

Sorry, typo, I meant "show log". haha

Re: turn on logging/timestamping on vers 6.3.5 code

dgalati000 — Mon, 23 Apr 2007 15:13:34 GMT

found out we don't use syslog per se...just HPOV, etc. I've got one other reply from someone else on this, waiting to see if I can get it timestamping on this old vers pix code...I think we did get it working last week on another old vers code but not this one...hate the old code period...BTW-your last name is the name of the OLD Chicago WHite Sox Park - Comiskey Park.