topic Re: Firewall Switch Module 'admin' context is full in Network Security https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723087#M1007508 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>This happens when i try and add a new ACL. Yet it says it has used only 75% anyone come accross this.</P><P></P><P>Regards</P><P></P><P>Kev</P></BODY></HTML> Fri, 13 Apr 2007 08:48:47 GMT kevinhobson2000 2007-04-13T08:48:47Z Firewall Switch Module 'admin' context is full https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723085#M1007504 <P>Hi i have been getting this message on my FWSM and was wondering how i go about resolving this.</P><P></P><P>Cheers</P><P></P><P>Kev</P> Mon, 11 Mar 2019 09:59:04 GMT https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723085#M1007504 kevinhobson2000 2019-03-11T09:59:04Z Re: Firewall Switch Module 'admin' context is full https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723086#M1007506 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>How many interfaces are allocated on the admin context?</P><P></P><P>The maximum amount of interface on one context is 256</P><P></P><P>Best regards Stefan (Sweden)</P></BODY></HTML> Fri, 13 Apr 2007 06:07:08 GMT https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723086#M1007506 s-andersson 2007-04-13T06:07:08Z Re: Firewall Switch Module 'admin' context is full https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723087#M1007508 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>This happens when i try and add a new ACL. Yet it says it has used only 75% anyone come accross this.</P><P></P><P>Regards</P><P></P><P>Kev</P></BODY></HTML> Fri, 13 Apr 2007 08:48:47 GMT https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723087#M1007508 kevinhobson2000 2007-04-13T08:48:47Z Re: Firewall Switch Module 'admin' context is full https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723088#M1007509 <HTML><HEAD></HEAD><BODY><P>Please can you post the error message.</P><P></P><P>Usually the message that you talking about is just indicating how much of the maximum ressources you have allready used. In your case you still have 25% of the maximum possible ACLs free of 75% of it used.</P><P></P><P>Do you use single or multiple context mode.</P><P></P><P>If you are in multi context mode then type the following command and post the result :</P><P></P><P>enable</P><P>changeto context system</P><P>show resource acl-partition</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_2_3/fwsm_ref/s.htm#wp2077431" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_2_3/fwsm_ref/s.htm#wp2077431</A></P><P></P><P>Usually you have totaly limit, for the whole FWSM balde, of 150k ACLs.</P><P></P><P>Even if you split it to 12 (default) patitions then you have quit a lot of ACL.</P><P>150k / 12 = 12,5k ACLs. of each partitions and all firewalls in that partition.</P><P></P><P>Note: Remove confidential informations.</P><P></P><P>sincerely</P><P>Patrick</P><P></P><P></P></BODY></HTML> Fri, 13 Apr 2007 12:22:35 GMT https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723088#M1007509 Patrick Iseli 2007-04-13T12:22:35Z Re: Firewall Switch Module 'admin' context is full https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723089#M1007510 <HTML><HEAD></HEAD><BODY><P>The Software Version is FWSM Firewall Version 2.3(1)7 <SYSTEM></SYSTEM></P><P>FWSM Device Manager Version 4.1(2)</P><P></P><P>The Error message is ERROR: Unable to add, access-list config limit reached.</P><P></P><P>I suspect this is a book in the software version on the FWSM.</P><P></P><P>Cheers</P><P></P><P>Kev</P></BODY></HTML> Tue, 17 Apr 2007 12:38:54 GMT https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723089#M1007510 kevinhobson2000 2007-04-17T12:38:54Z Re: Firewall Switch Module 'admin' context is full https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723090#M1007511 <HTML><HEAD></HEAD><BODY><P>Output from command:</P><P></P><P>FWSM# show resource acl-partition</P><P>Total number of configured partitions = 12</P><P>Partition #0</P><P> Mode : non-exclusive</P><P> List of Contexts : admin</P><P> Number of contexts : 1(RefCount:1)</P><P> Number of rules : 9569(Max:12248)</P><P>Partition #1</P><P> Mode : non-exclusive</P><P> List of Contexts : omnipay</P><P> Number of contexts : 1(RefCount:1)</P><P> Number of rules : 6427(Max:12248)</P><P>Partition #2</P><P> Mode : non-exclusive</P><P> List of Contexts : wups</P><P> Number of contexts : 1(RefCount:1)</P><P> Number of rules : 1523(Max:12248)</P><P>Partition #3</P><P> Mode : non-exclusive</P><P> List of Contexts : schemes</P><P> Number of contexts : 1(RefCount:1)</P><P> Number of rules : 270(Max:12248)</P><P>Partition #4</P><P> Mode : non-exclusive</P><P> List of Contexts : extranet</P><P> Number of contexts : 1(RefCount:1)</P><P> Number of rules : 408(Max:12248)</P><P>Partition #5</P><P> Mode : non-exclusive</P><P> List of Contexts : wucom</P><P> Number of contexts : 1(RefCount:1)</P><P> Number of rules : 759(Max:12248)</P><P>Partition #6</P><P> Mode : non-exclusive</P><P> List of Contexts : none</P><P> Number of contexts : 0(RefCount:0)</P><P> Number of rules : 0(Max:12248)</P><P>Partition #7</P><P> Mode : non-exclusive</P><P> List of Contexts : none</P><P> Number of contexts : 0(RefCount:0)</P><P> Number of rules : 0(Max:12248)</P><P>Partition #8</P><P> Mode : non-exclusive</P><P> List of Contexts : none</P><P> Number of contexts : 0(RefCount:0)</P><P> Number of rules : 0(Max:12248)</P><P>Partition #9</P><P> Mode : non-exclusive</P><P> List of Contexts : none</P><P> Number of contexts : 0(RefCount:0)</P><P> Number of rules : 0(Max:12248)</P><P>Partition #10</P><P> Mode : non-exclusive</P><P> List of Contexts : none</P><P> Number of contexts : 0(RefCount:0)</P><P> Number of rules : 0(Max:12248)</P><P>Partition #11</P><P> Mode : non-exclusive</P><P> List of Contexts : none</P><P> Number of contexts : 0(RefCount:0)</P><P> Number of rules : 0(Max:12248)</P><P>FWSM#</P><P></P><P></P></BODY></HTML> Tue, 17 Apr 2007 13:05:36 GMT https://community.cisco.com/t5/network-security/firewall-switch-module-admin-context-is-full/m-p/723090#M1007511 kevinhobson2000 2007-04-17T13:05:36Z