topic Re: PIx 515E Rule question in Network Security https://community.cisco.com/t5/network-security/pix-515e-rule-question/m-p/812925#M1007740 <HTML><HEAD></HEAD><BODY><P>Hi ..</P><P></P><P>That line of config is telling you that any entries you have as part of access list 100 will be NATed or PATed as they traverse to other interface which has the global (Interface name) 1 value configured .. </P><P></P><P>I hope it helps .. please rate it if it does !!!</P><P></P><P></P></BODY></HTML> Mon, 09 Apr 2007 23:18:09 GMT Fernando_Meza 2007-04-09T23:18:09Z PIx 515E Rule question https://community.cisco.com/t5/network-security/pix-515e-rule-question/m-p/812924#M1007739 <P>I have a reverse Nat table in my fix 515E router. There is a line in the config: </P><P>nat (inside) 1 access-list 100 0 0</P><P>It appears right up the individual table entry lines for the reverse NAT. Does that line mean I can have only 100 enteries in that table? </P> Mon, 11 Mar 2019 09:58:11 GMT https://community.cisco.com/t5/network-security/pix-515e-rule-question/m-p/812924#M1007739 tbarberio 2019-03-11T09:58:11Z Re: PIx 515E Rule question https://community.cisco.com/t5/network-security/pix-515e-rule-question/m-p/812925#M1007740 <HTML><HEAD></HEAD><BODY><P>Hi ..</P><P></P><P>That line of config is telling you that any entries you have as part of access list 100 will be NATed or PATed as they traverse to other interface which has the global (Interface name) 1 value configured .. </P><P></P><P>I hope it helps .. please rate it if it does !!!</P><P></P><P></P></BODY></HTML> Mon, 09 Apr 2007 23:18:09 GMT https://community.cisco.com/t5/network-security/pix-515e-rule-question/m-p/812925#M1007740 Fernando_Meza 2007-04-09T23:18:09Z