topic Re: CiscoWorks - Check for a certain command in Network Security https://community.cisco.com/t5/network-security/ciscoworks-check-for-a-certain-command/m-p/1025054#M1007935 <HTML><HEAD></HEAD><BODY><P>You can use baseline templates in RME to do this</P></BODY></HTML> Mon, 26 May 2008 13:26:30 GMT David Stanford 2008-05-26T13:26:30Z CiscoWorks - Check for a certain command https://community.cisco.com/t5/network-security/ciscoworks-check-for-a-certain-command/m-p/1025053#M1007934 <P>Hi,</P><P>Is there a way to check the running config of a whole heap of devices for a certain command?</P><P></P><P>Login to every device and check for say this text....ip http server</P><P></P><P>Then in the results it would show me which ones have it and which ones don't</P><P></P><P>Thanks</P> Fri, 21 Feb 2020 10:02:09 GMT https://community.cisco.com/t5/network-security/ciscoworks-check-for-a-certain-command/m-p/1025053#M1007934 muca 2020-02-21T10:02:09Z Re: CiscoWorks - Check for a certain command https://community.cisco.com/t5/network-security/ciscoworks-check-for-a-certain-command/m-p/1025054#M1007935 <HTML><HEAD></HEAD><BODY><P>You can use baseline templates in RME to do this</P></BODY></HTML> Mon, 26 May 2008 13:26:30 GMT https://community.cisco.com/t5/network-security/ciscoworks-check-for-a-certain-command/m-p/1025054#M1007935 David Stanford 2008-05-26T13:26:30Z