topic thank you for your response. in Network Security

firepower module recover

welmjendel — Tue, 12 Mar 2019 13:17:01 GMT

hello guys,

i would reimage my module firepower 5.4.1.1 and install 6.1.0, if this action was done the license (malware & url filtring) still available on my asa ?

regards,

wajih

Updating the Firepower

syeda3 — Thu, 09 Feb 2017 19:01:02 GMT

Updating the Firepower Management Center to Version 6.1 may delete or disable Classic licenses for managed NGIPSv, ASA FirePOWER, 7000 Series, and 8000 Series devices. Before you begin the update, contact Support for a script you can run to prevent this issue.
If you do not run the script, after the update, use the Classic licenses page (System > Licenses > Classic Licenses) to check and reinstall any deleted licenses. Use the Device Management page (Devices > Device Management) to edit Classic managed devices and reenable the appropriate licenses.

http://www.cisco.com/c/en/us/td/docs/security/firepower/610/relnotes/Firepower_System_Release_Notes_Version_610.html

The licenses is applied from

Marvin Rhoads — Fri, 10 Feb 2017 07:38:09 GMT

The licenses is applied from and resides on the management system - FirePOWER Management Center (or ASDM if you are using that).

If you re-image, you should remove the current device from the manager and then you will have available licenses. When you re-add it, you re-apply those same licenses back on the device.

thank you for your response.

welmjendel — Fri, 10 Feb 2017 13:26:29 GMT

thank you for your response.

You're welcome.

Marvin Rhoads — Fri, 10 Feb 2017 15:08:15 GMT

You're welcome.

Please rate it if the answer helped.