topic Re: FMC-FTD Initialization in Network Security

FMC-FTD Initialization

Jawad Ahmad — Fri, 21 Feb 2020 14:58:50 GMT

Hello all,

I'm using Virtual FTD and FMC. FTD registers with FMC but after sometime it's showing error in FTD Status, connectivity between FMC and FTD is ok.

When I check from FTD cli by this command Show manager,

Show manager

syntax error: Illegal parameter

after again add manger in FTD Cli successfully added in FMC but when I check in

device> device management>
there's showing error.

Bogdan Nita — Tue, 19 Dec 2017 14:34:01 GMT

Can you share the error message on the FMC ?

Jawad Ahmad — Tue, 19 Dec 2017 14:46:42 GMT

I attached snapshot, please have a look.

Bogdan Nita — Tue, 19 Dec 2017 15:19:40 GMT

Maybe I am missing something, but in the snapshot I only see that the FTD has an error.

I do not see the message.

Message should be visible if you click on the red "!" top right.

Jawad Ahmad — Wed, 20 Dec 2017 05:28:54 GMT

please check,

Bogdan Nita — Wed, 27 Dec 2017 11:35:19 GMT

Sorry for the late reply.

It seems the errors are caused by:

- time synchronization issues between FTD and FMC

- no traffic seen on some FTD interfaces, if the FTD is not actively used the error could be ignored

For time synchronization issues please check the following guide:

opsy — Wed, 15 Jun 2022 04:59:15 GMT

Hi team,

when i integration FMCv to Firepower2130 i got Syntax error: Illegal parameter

Marvin Rhoads — Wed, 15 Jun 2022 14:54:49 GMT

@opsy you're replying to a 5 year old thread with a new issue.

Please start a new thread and include more details of what you are doing when encountering the error you mention.