https://community.cisco.com/t5/network-security/asa-v-ftd-performance/m-p/3798201#M1011038 <P>Attached some performance report for reference. hope this help yous sizing the device.</P> Fri, 08 Feb 2019 23:03:32 GMT balaji.bandi 2019-02-08T23:03:32Z https://community.cisco.com/t5/network-security/asa-v-ftd-performance/m-p/3797845#M1011037 <P>Hi,</P> <P>&nbsp;</P> <P>I have a customer running ASA5545s in ASA mode with IPS and AMP enabled on a 1Gbps circuit.</P> <P>&nbsp;</P> <P>The code is relatively old and we are looking at upgrade or replacement options.</P> <P>&nbsp;</P> <P>The firewalls are running at ~70% utilization. I have access to the Performance Estimator and know there is the option of proposing replacement 2100s but if, as a medium term measure, we were to migrate to FTD, are there any figures to suggest the % improvement the customer would see using the unified FTD code instead of ASA with FP services?</P> <P>&nbsp;</P> <P>Thanks.&nbsp;</P> <P>&nbsp;</P> Fri, 21 Feb 2020 16:47:16 GMT https://community.cisco.com/t5/network-security/asa-v-ftd-performance/m-p/3797845#M1011037 melgrove 2020-02-21T16:47:16Z https://community.cisco.com/t5/network-security/asa-v-ftd-performance/m-p/3798201#M1011038 <P>Attached some performance report for reference. hope this help yous sizing the device.</P> Fri, 08 Feb 2019 23:03:32 GMT https://community.cisco.com/t5/network-security/asa-v-ftd-performance/m-p/3798201#M1011038 balaji.bandi 2019-02-08T23:03:32Z