topic Re: CSM 3.1 - Discover Devices in Network Security

CSM 3.1 - Discover Devices

tckoon — Fri, 21 Feb 2020 09:56:18 GMT

Hi,

As I knew when we discover devices, it will discover all the devices config and overide the previous copy in CSM DB. Can we SELECTIVELY choose only one device to be discovered ? Otherwise afer discovered we need to re-deploy all again.

Reason is 1 out of 4 firewall managed by CSM. The user access direct to firewall and perform configuration change directly at firewall. Therefore the CSM DB is not in sync with firewall. I just want to discover that unit of firewall.

Regards

Re: CSM 3.1 - Discover Devices

irisrios — Tue, 18 Mar 2008 19:01:53 GMT

I think this can be accomplished with help of objects, which can be set for induvidual devices. Check the URL http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/3.1/user/guide/defapset.html#wpxref64945 for more information.

Re: CSM 3.1 - Discover Devices

Jason Gervia — Tue, 25 Mar 2008 00:35:33 GMT

In device management, if you right click on the device, there should be an option for 'discover policies on device'. You'll have to re-assign any shared policies after discovery, however.