topic Re: Can not use firepower interface in Network Security

Can not use firepower interface

Maivoko — Tue, 12 Mar 2019 14:06:22 GMT

Originally follow manual can see firepower user interface in ASDM in ASA5506X

but after watch youtube tutorial

to set

configure manager 192.168.1.1 keyisnotPAKbutmyimaginedtext

then ASDM firepower user interface disappear

how to make it appear again?

Re: Can not use firepower interface

matty-boy — Wed, 21 Nov 2018 11:44:58 GMT

If you want to manage your Firepower from an FMC then do as you said (and then add it to the FMC GUI)....

> configure manager x.x.x.x <key>

If you do not want to manage it from an FMC and you want to manage it locally from ASDM, then you need to revert what you did earlier with this command:

> configure manager delete

A Firepower can only be managed locally or by an FMC, not both.

Hope this helps,

Matt.

Re: Can not use firepower interface

Maivoko — Wed, 21 Nov 2018 12:20:27 GMT

I have tried to delete and show managed locally

but there is no firepower tab in the left panel in ASDM

what should do I do next?

Re: Can not use firepower interface

matty-boy — Wed, 21 Nov 2018 12:26:07 GMT

From the Firepower prompt, please reply with output from....

> show managers

Re: Can not use firepower interface

Maivoko — Wed, 21 Nov 2018 13:00:22 GMT

Attached screen capture

Re: Can not use firepower interface

Abheesh Kumar — Wed, 21 Nov 2018 13:13:58 GMT

Hi,
Now the Firpower is managed locally, please exit from ASDM and try to login again to see the firepower tab.

HTH
Abheesh

Re: Can not use firepower interface

Marvin Rhoads — Wed, 21 Nov 2018 13:15:24 GMT

Try to launch ASDM from a different computer. If the Firepower menus show up from it, then you may need to delete the Java temporary files on the original computer.

Re: Can not use firepower interface

Maivoko — Wed, 21 Nov 2018 13:22:37 GMT

I have exit and login again but same no firepower tab

what is directory of temporary java files ? Which files can be deleted?

Re: Can not use firepower interface

Abheesh Kumar — Wed, 21 Nov 2018 13:38:55 GMT

before deleting java files try accessing from a different machine.

HTH
Abheesh

Re: Can not use firepower interface

Maivoko — Wed, 21 Nov 2018 13:56:57 GMT

I do not have another machine , I have set do not keep temporary files in java setting

but still have not show the firepower tab

Re: Can not use firepower interface

Marvin Rhoads — Wed, 21 Nov 2018 13:59:36 GMT

Can you confirm the ASA management interface is connected properly?

Also, please share "show module sfr detail".

The IP address of the module (as reported in that output) is what will appear on the ASA management interface and that address must be reachable from your PC that's running ASDM.

Re: Can not use firepower interface

Maivoko — Wed, 21 Nov 2018 14:15:12 GMT

Port 3 and management port no light

Re: Can not use firepower interface

Marvin Rhoads — Wed, 21 Nov 2018 14:19:38 GMT

Figure out why your management interface isn't connecting.

Until it does you will not be able to manage the Firepower module.

Re: Can not use firepower interface

Maivoko — Wed, 21 Nov 2018 14:22:02 GMT

Firepower management interface appear

i discover management interface should not set management port

it should set inside