topic Thank you , i will give it a in Network Security

FTD 4110 Captive Portal Active Authentication

Silver_Cat — Fri, 21 Feb 2020 14:00:05 GMT

Hello Everyone, Deployed FTD 4110 with active authentication , the login redirect is coming from FTD gateway ip address , is there any way to change the redirect from IP to FQDN so that the users dont see the invalid certificate error message ? We are running latest version 6.2

Have a read of this (search

Philip D'Ath — Sun, 05 Feb 2017 22:14:12 GMT

Have a read of this (search for the word "redirect"):

http://www.cisco.com/c/en/us/td/docs/security/firepower/610/fdm/fptd-fdm-config-guide-610.pdf

ps. It looks like you must

Philip D'Ath — Sun, 05 Feb 2017 22:15:11 GMT

ps. It looks like you must use "HTTP Negotiate" for your authentication.

Thank you , i will give it a

Silver_Cat — Sun, 05 Feb 2017 22:49:51 GMT

Thank you , i will give it a try.

Search for the required

Farhan Mohamed — Wed, 08 Feb 2017 18:59:57 GMT

Search for the required keywords for the solution. It will help you out. See the release notes link below:-

http://www.cisco.com/c/en/us/td/docs/security/firepower/620/relnotes/Firepower_System_Release_Notes_Version_620.pdf

Also See this-:

http://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/introduction_to_the_cisco_firepower_system.html

I am sure we can redirect, But cannot recall, exact way. Its a one liner though.