topic ASA 5520 Firewall in Network Security

ASA 5520 Firewall

hussainkhalid — Mon, 11 Mar 2019 10:40:35 GMT

I need to remove one NAT which is there, through GUI it wont allow my saying some security rule warning. i also tried to disable security rule and tried but still couldnt do it.

now i was thinking to remove from command line.

the NAT is shown below

static (Inside,Outside) XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX netmask 255.255.255.255

The ip address for Inside, Outside is the same so i was trying to remove it. could any one tell me how can i remove this line from command line??

waiting...

Re: ASA 5520 Firewall

zulqurnain — Thu, 05 Jul 2007 08:12:38 GMT

hello,

on the prompt write

(config)# no static (Inside,Outside) XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX netmask 255.255.255.255

hth, please rate it

Re: ASA 5520 Firewall

hussainkhalid — Thu, 05 Jul 2007 09:27:48 GMT

no static (Inside,Outside) 62.215.215.215 62.215.215.215 netmask 255.255.255.255

^ clear global 62.215.215.215 Local 62.215.215.215

ERROR: % Invalid input detected at '^' marker.

I GET THIS ERROR MESSAGE! PLEASE HELP ON THIS!

Re: ASA 5520 Firewall

hussainkhalid — Thu, 05 Jul 2007 09:29:09 GMT

clear xlate global 62.215.215.215

tried this as well, but

didnt work, doesnt give any error... but when i say

sh xlate

the entry is still there!

do i need to remove NAT before that?

Re: ASA 5520 Firewall

hussainkhalid — Sat, 07 Jul 2007 06:12:53 GMT

any help on this please?

Re: ASA 5520 Firewall

zulqurnain — Sat, 07 Jul 2007 10:10:41 GMT

hello,

do the above as suggested and reload your firewall.

hth, please rate it

Re: ASA 5520 Firewall

hussainkhalid — Mon, 09 Jul 2007 11:15:32 GMT

doesnt work!! is there any thing else linked with this which i need to delete before i run this command?? i tried to delete xlate before i delete the nat! doesnt work!