FWSM question on design

bbravo — Mon, 11 Mar 2019 09:45:15 GMT

Thanks everyone, I have dual 6509's with dual FWSM's, basically I need to be able to create FW rules to permit/deny traffic to/from user vlans to several server vlans and between other networks, etc. These VLANs are present in the 6509, can I do this by running transparent mode on the FWSM? First time setting up FWSM, any hints, recommendations are appreciated.

Thanks again.

Re: FWSM question on design

Patrick Iseli — Tue, 13 Mar 2007 02:44:15 GMT

Take a look at this guides which will give am idea how to setup your FWSM and witch mode us best for your purpose !

Reference: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_2_3/fwsm_cfg/examples.htm

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_3_1/fwsm_cfg/exampl_f.htm

The whole documentation:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_2_3/

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_3_1/

sincerely

Patrick

topic Re: FWSM question on design in Network Security

FWSM question on design

Re: FWSM question on design