topic Re: Error when using wr mem in Network Security https://community.cisco.com/t5/network-security/error-when-using-wr-mem/m-p/624373#M1023681 <HTML><HEAD></HEAD><BODY><P>please make the other unit primary,do a wr erase on this one.one the config. is replicated,then do a " wr mem " .</P><P></P><P>hth</P><P></P><P>Sushil</P><P>Cisco TAC</P></BODY></HTML> Fri, 09 Mar 2007 13:31:09 GMT suschoud 2007-03-09T13:31:09Z Error when using wr mem https://community.cisco.com/t5/network-security/error-when-using-wr-mem/m-p/624370#M1023672 <P>Hi everyone, </P><P></P><P>I got a strange problem, on my FWSM, when i use the command wr mem i get a error, any one seen this befor ??</P><P></P><P>ipmsap/act# wr mem</P><P>Building configuration...</P><P>Cryptochecksum: xxx</P><P></P><P>%Error copying flash:/startup-config (Cannot overwrite image (asdm) file with ascii text file.)</P><P>Error executing command</P><P>[FAILED]</P><P>ipmsap/act#</P><P></P><P>The configuration i don just after session slot X processor 1</P><P></P><P>Cheers </P><P>Peter</P> Mon, 11 Mar 2019 09:43:52 GMT https://community.cisco.com/t5/network-security/error-when-using-wr-mem/m-p/624370#M1023672 p.danielsen 2019-03-11T09:43:52Z Re: Error when using wr mem https://community.cisco.com/t5/network-security/error-when-using-wr-mem/m-p/624371#M1023675 <HTML><HEAD></HEAD><BODY><P>is this in failover ?</P><P></P><P>if yes,</P><P></P><P>issue a wr erase first and afterwards " wr mem "</P><P></P><P>please rate if this helps</P><P>Regards,</P><P>Sushil</P></BODY></HTML> Thu, 08 Mar 2007 19:44:53 GMT https://community.cisco.com/t5/network-security/error-when-using-wr-mem/m-p/624371#M1023675 suschoud 2007-03-08T19:44:53Z Re: Error when using wr mem https://community.cisco.com/t5/network-security/error-when-using-wr-mem/m-p/624372#M1023678 <HTML><HEAD></HEAD><BODY><P>Yes the firewall is one part of failover setup, but it is the primary in the failover,</P><P></P><P>the error was first seen after a password recovery attemt.</P><P></P><P>cheers</P><P>Peter</P></BODY></HTML> Fri, 09 Mar 2007 05:12:03 GMT https://community.cisco.com/t5/network-security/error-when-using-wr-mem/m-p/624372#M1023678 p.danielsen 2007-03-09T05:12:03Z Re: Error when using wr mem https://community.cisco.com/t5/network-security/error-when-using-wr-mem/m-p/624373#M1023681 <HTML><HEAD></HEAD><BODY><P>please make the other unit primary,do a wr erase on this one.one the config. is replicated,then do a " wr mem " .</P><P></P><P>hth</P><P></P><P>Sushil</P><P>Cisco TAC</P></BODY></HTML> Fri, 09 Mar 2007 13:31:09 GMT https://community.cisco.com/t5/network-security/error-when-using-wr-mem/m-p/624373#M1023681 suschoud 2007-03-09T13:31:09Z