topic Re: ASA 5540 Failover in Network Security https://community.cisco.com/t5/network-security/asa-5540-failover/m-p/685899#M1024318 <HTML><HEAD></HEAD><BODY><P>syslogs would be very helpful in order to pin-point the reason as to why Primary PIX is failing over to secondary repeatedly. </P><P></P><P>Is it possible to look at the logs?</P><P></P><P>Regards,</P><P>Vibhor.</P><P></P></BODY></HTML> Fri, 02 Mar 2007 12:14:54 GMT vitripat 2007-03-02T12:14:54Z ASA 5540 Failover https://community.cisco.com/t5/network-security/asa-5540-failover/m-p/685898#M1024317 <P>I have configured Active/Standby ASA 5540 failover. I cannot make the primary to be active for long it fails over to secondary after sometime. </P><P>I tried reloading seconday(active) it fails over to primary but after sometime it again failover back to secondary. All the connectivty seems to be OK</P><P>(interface, failover/stateful lan link)</P><P></P><P>see the attachment for config</P><P></P><P></P> Mon, 11 Mar 2019 09:40:45 GMT https://community.cisco.com/t5/network-security/asa-5540-failover/m-p/685898#M1024317 rvgprasad 2019-03-11T09:40:45Z Re: ASA 5540 Failover https://community.cisco.com/t5/network-security/asa-5540-failover/m-p/685899#M1024318 <HTML><HEAD></HEAD><BODY><P>syslogs would be very helpful in order to pin-point the reason as to why Primary PIX is failing over to secondary repeatedly. </P><P></P><P>Is it possible to look at the logs?</P><P></P><P>Regards,</P><P>Vibhor.</P><P></P></BODY></HTML> Fri, 02 Mar 2007 12:14:54 GMT https://community.cisco.com/t5/network-security/asa-5540-failover/m-p/685899#M1024318 vitripat 2007-03-02T12:14:54Z