topic 3005 concentrator network filter to host level in Network Security https://community.cisco.com/t5/network-security/3005-concentrator-network-filter-to-host-level/m-p/892395#M1025704 <P>Can you configure a network filter to allow a remote client to only access certain hosts in a subnet?</P><P></P><P>We have a support company the we would like to limit access to only two servers in two different subnets, is that possible?</P> Fri, 21 Feb 2020 09:41:33 GMT wilson_1234_2 2020-02-21T09:41:33Z 3005 concentrator network filter to host level https://community.cisco.com/t5/network-security/3005-concentrator-network-filter-to-host-level/m-p/892395#M1025704 <P>Can you configure a network filter to allow a remote client to only access certain hosts in a subnet?</P><P></P><P>We have a support company the we would like to limit access to only two servers in two different subnets, is that possible?</P> Fri, 21 Feb 2020 09:41:33 GMT https://community.cisco.com/t5/network-security/3005-concentrator-network-filter-to-host-level/m-p/892395#M1025704 wilson_1234_2 2020-02-21T09:41:33Z Re: 3005 concentrator network filter to host level https://community.cisco.com/t5/network-security/3005-concentrator-network-filter-to-host-level/m-p/892396#M1025707 <HTML><HEAD></HEAD><BODY><P>Complete these steps to configure the Cisco VPN 3005-1 Concentrator with an IP address of 172.16.172.36.</P><P>Select Configuration &gt; System &gt; Tunneling Protocols &gt; IPSec &gt; LAN-to-LAN &gt; Modify to define a LAN-to-LAN tunnel with the Cisco VPN 3005-1 Concentrator (172.16.172.36).</P><P>One important thing to notice is that the IP addresses in Local Network and Remote Network need to be the translated IP subnets as planned in the translation table</P><P></P></BODY></HTML> Tue, 25 Sep 2007 19:29:11 GMT https://community.cisco.com/t5/network-security/3005-concentrator-network-filter-to-host-level/m-p/892396#M1025707 umedryk 2007-09-25T19:29:11Z