topic Re: Maximum number of interfaces already configured in Network Security https://community.cisco.com/t5/network-security/maximum-number-of-interfaces-already-configured/m-p/664932#M1026481 <HTML><HEAD></HEAD><BODY><P>After upgrading my PIX ro ver 7.0, I hv configured 2 interfaces. If I'm trying any other interface beyond this, the error appears.</P><P></P><P>Wat could be the problem?</P></BODY></HTML> Sat, 10 Feb 2007 06:05:58 GMT bvsnarayana03 2007-02-10T06:05:58Z Maximum number of interfaces already configured https://community.cisco.com/t5/network-security/maximum-number-of-interfaces-already-configured/m-p/664930#M1026479 <P>i have upgraded my pix 525 to ios 7.0 ,after that i am not able to configure more than two interfaces.</P><P></P><P>sh version of the device is as below</P><P>Cisco PIX Security Appliance Software Version 7.0(5)</P><P>This platform has an Unrestricted (UR) license. </P><P></P><P>Inside Hosts : Unlimited </P><P>Failover : Active/Active </P><P>VPN-DES : Enabled </P><P>VPN-3DES-AES : Disabled </P><P>Cut-through Proxy : Enabled </P><P>Guards : Enabled </P><P>URL Filtering : Enabled </P><P>Security Contexts : 2 </P><P>GTP/GPRS : Disabled </P><P>VPN Peers : Unlimited </P><P></P><P></P><P> </P> Mon, 11 Mar 2019 09:31:12 GMT https://community.cisco.com/t5/network-security/maximum-number-of-interfaces-already-configured/m-p/664930#M1026479 bvsnarayana03 2019-03-11T09:31:12Z Re: Maximum number of interfaces already configured https://community.cisco.com/t5/network-security/maximum-number-of-interfaces-already-configured/m-p/664931#M1026480 <HTML><HEAD></HEAD><BODY><P>A PIX-525 running 7.x code with UR license, has following interface limits:</P><P></P><P>Maximum Physical Interfaces : 10</P><P>Maximum VLANs : 100</P><P></P><P>Do you have more configured? When do you see this error?</P></BODY></HTML> Sat, 10 Feb 2007 00:43:36 GMT https://community.cisco.com/t5/network-security/maximum-number-of-interfaces-already-configured/m-p/664931#M1026480 vitripat 2007-02-10T00:43:36Z Re: Maximum number of interfaces already configured https://community.cisco.com/t5/network-security/maximum-number-of-interfaces-already-configured/m-p/664932#M1026481 <HTML><HEAD></HEAD><BODY><P>After upgrading my PIX ro ver 7.0, I hv configured 2 interfaces. If I'm trying any other interface beyond this, the error appears.</P><P></P><P>Wat could be the problem?</P></BODY></HTML> Sat, 10 Feb 2007 06:05:58 GMT https://community.cisco.com/t5/network-security/maximum-number-of-interfaces-already-configured/m-p/664932#M1026481 bvsnarayana03 2007-02-10T06:05:58Z Re: Maximum number of interfaces already configured https://community.cisco.com/t5/network-security/maximum-number-of-interfaces-already-configured/m-p/664933#M1026482 <HTML><HEAD></HEAD><BODY><P>Do you have the physical intefaces installed?</P></BODY></HTML> Wed, 21 Feb 2007 19:37:39 GMT https://community.cisco.com/t5/network-security/maximum-number-of-interfaces-already-configured/m-p/664933#M1026482 xe1zvo 2007-02-21T19:37:39Z