static pat

aksher — Mon, 11 Mar 2019 09:30:07 GMT

Does a static PAT of this kind allowed to map mulitple global ips to single internal ip on the PIX/ASA 7.2

access-list WAN permit any host 192.168.1.1

static (inside, WAN) tcp 192.168.1.1 80 10.1.1.1 8080 netmask 255.255.255.255

access-list OUT permit any host 192.168.1.2

static (inside, OUT) tcp 192.168.1.2 21 10.1.1.1 21 netmask 255.255.255.255

Re: static pat

sachinraja — Wed, 07 Feb 2007 03:56:04 GMT

hello aksher,

unless and until they are configured out of two different interfaces, it is possible !!! i mean you can configure a mail server to an IP address on the outside interface (say 10.1.1.1 - > 202.202.202.202) & also to another interface DMZ ... (10.1.1.1 -> 192.168.1.1)... this is possible.. but if u want to do it on the same interface, it isnt..

Hope this helps.. all the best..

Raj

topic static pat in Network Security

static pat

Re: static pat