topic Licensing Trouble in Network Security

Licensing Trouble

mbaker33 — Tue, 12 Mar 2019 12:37:20 GMT

I have started the process of replacing our CX module with the SRF module and have faced an issue in the early going. I have the Module loaded on the ASA, and the Defense Center VM installed and license files installed. However, when I attempt to add the SRF module to the Defense Center as a new device, I am unable to select any licenses. When looking at the licensing available on the Defense Center, it shows two available for URL Filtering and Malware, but I am unable to select them.

Any ideas? Am I supposed to register the SRF module on the ASA? I couldn't find a way to do that, and all documentation seemed to point to doing it at the Defense Center.

Thanks,

Mark

You need to make sure that

ckloosterman — Fri, 13 Feb 2015 00:53:46 GMT

You need to make sure that they ordered the CTRL license.

You need it to license the device.

Cisco ASA 5500-X FirePOWER Services Upgrade Licenses

Part Number	Description
ASA5512-CTRL-LIC=	Cisco ASA5512 FirePOWER Services Upgrade Control License
ASA5515-CTRL-LIC=	Cisco ASA5515 FirePOWER Services Upgrade Control License
ASA5525-CTRL-LIC=	Cisco ASA5525 FirePOWER Services Upgrade Control License
ASA5545-CTRL-LIC=	Cisco ASA5545 FirePOWER Services Upgrade Control License
ASA5555-CTRL-LIC=	Cisco ASA5555 FirePOWER Services Upgrade Licenses Control License

In addition to the earlier

Marvin Rhoads — Fri, 13 Feb 2015 14:00:05 GMT

In addition to the earlier response - yes it is done exclusively on the Firesight Management Center.

You do need 5.3.1 as the prerequisite version.