topic Re: PIX xlate timeout in Network Security https://community.cisco.com/t5/network-security/pix-xlate-timeout/m-p/639903#M1030534 <HTML><HEAD></HEAD><BODY><P>Hello Jeff,</P><P></P><P>I really dont think you can do this !!! timeout xlate is a global command which applies to all the NAT translation entries.. you cannot set this parameter with a source IP address...</P><P></P><P>Hope this helps.. all the best.. rate replies if found useful..</P><P></P><P>Raj</P></BODY></HTML> Fri, 22 Dec 2006 03:00:03 GMT sachinraja 2006-12-22T03:00:03Z PIX xlate timeout https://community.cisco.com/t5/network-security/pix-xlate-timeout/m-p/639902#M1030532 <P>Does anyone know if there is a way to associate different xlate timeout values with different global pools if I'm doing policy NAT? </P><P></P><P>So, if I NAT to one destination I can set the xlate timeout value to 4 hours and if I NAT to a second destination I can set the xlate timeout to 7 hours?</P><P></P><P>Thanks,</P> Mon, 11 Mar 2019 09:12:08 GMT https://community.cisco.com/t5/network-security/pix-xlate-timeout/m-p/639902#M1030532 jeff.vargas 2019-03-11T09:12:08Z Re: PIX xlate timeout https://community.cisco.com/t5/network-security/pix-xlate-timeout/m-p/639903#M1030534 <HTML><HEAD></HEAD><BODY><P>Hello Jeff,</P><P></P><P>I really dont think you can do this !!! timeout xlate is a global command which applies to all the NAT translation entries.. you cannot set this parameter with a source IP address...</P><P></P><P>Hope this helps.. all the best.. rate replies if found useful..</P><P></P><P>Raj</P></BODY></HTML> Fri, 22 Dec 2006 03:00:03 GMT https://community.cisco.com/t5/network-security/pix-xlate-timeout/m-p/639903#M1030534 sachinraja 2006-12-22T03:00:03Z Re: PIX xlate timeout https://community.cisco.com/t5/network-security/pix-xlate-timeout/m-p/639904#M1030536 <HTML><HEAD></HEAD><BODY><P>Jeff,</P><P></P><P>Timeout xlate is a global command </P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_reference_chapter09186a008048f6fb.html#wp1259027" target="_blank">http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_reference_chapter09186a008048f6fb.html#wp1259027</A></P><P></P><P>however you could user conn timeout under class-map/policy-map to achieve what you are aiming at.</P><P></P><P></P></BODY></HTML> Fri, 22 Dec 2006 09:31:22 GMT https://community.cisco.com/t5/network-security/pix-xlate-timeout/m-p/639904#M1030536 varakantam 2006-12-22T09:31:22Z Re: PIX xlate timeout https://community.cisco.com/t5/network-security/pix-xlate-timeout/m-p/639905#M1030537 <HTML><HEAD></HEAD><BODY><P>Looks like this isn't going to work for me as I'm using a PIX535 running 6.3.4 and the policy map/class map commands looks like they were introduced on the FWSM 3.1 code.</P><P></P><P>Thanks anyway.</P></BODY></HTML> Fri, 22 Dec 2006 16:00:43 GMT https://community.cisco.com/t5/network-security/pix-xlate-timeout/m-p/639905#M1030537 jeff.vargas 2006-12-22T16:00:43Z