topic Cisco Pix 501 firewall in Network Security https://community.cisco.com/t5/network-security/cisco-pix-501-firewall/m-p/698455#M1031092 <P>I am having a problem with a Cisco Pix 501 firewall.</P><P>Iam trying to setup the inside address from 192.168.1.1 ( default ) to 10.10.0.200 and i'm receiving an error :</P><P>the ip address does not match with DHCP pool.</P><P>I use the web interface and the Hyper terminal telnet .</P><P>I would appreciate if you can help me a.s.a.p.</P><P>Thank you</P> Mon, 11 Mar 2019 09:33:47 GMT adi_bartos24 2019-03-11T09:33:47Z Cisco Pix 501 firewall https://community.cisco.com/t5/network-security/cisco-pix-501-firewall/m-p/698455#M1031092 <P>I am having a problem with a Cisco Pix 501 firewall.</P><P>Iam trying to setup the inside address from 192.168.1.1 ( default ) to 10.10.0.200 and i'm receiving an error :</P><P>the ip address does not match with DHCP pool.</P><P>I use the web interface and the Hyper terminal telnet .</P><P>I would appreciate if you can help me a.s.a.p.</P><P>Thank you</P> Mon, 11 Mar 2019 09:33:47 GMT https://community.cisco.com/t5/network-security/cisco-pix-501-firewall/m-p/698455#M1031092 adi_bartos24 2019-03-11T09:33:47Z Re: Cisco Pix 501 firewall https://community.cisco.com/t5/network-security/cisco-pix-501-firewall/m-p/698456#M1031123 <HTML><HEAD></HEAD><BODY><P>Ok, if you are not using the 501 to act as a DHCP server then you'll need to take this feature out.</P><P></P><P>In configuration mode:</P><P></P><P>clear dhcpd</P><P></P><P>save with: write mem</P><P></P><P>Now you'll be able to change the inside interface IP address i.e.</P><P></P><P>In configuration mode:</P><P></P><P>no ip address inside 192.168.1.1 </P><P></P><P>ip address inside 10.10.0.200 255.255.255.0</P><P></P><P>Again - save with: write mem</P><P></P><P>Hope this helps and please rate posts.</P><P></P><P></P></BODY></HTML> Thu, 15 Feb 2007 13:58:25 GMT https://community.cisco.com/t5/network-security/cisco-pix-501-firewall/m-p/698456#M1031123 jmia 2007-02-15T13:58:25Z