topic Re: Auth-Proxy feature of IOS firewall with TACACS+ in Network Security https://community.cisco.com/t5/network-security/auth-proxy-feature-of-ios-firewall-with-tacacs/m-p/670149#M1031471 <HTML><HEAD></HEAD><BODY><P>Hi Manish,</P><P></P><P>Yes, you can configure Auth-Proxy with tacacs+. What configuration help do you require? The document has all the steps to configure it.</P><P></P><P>Cheers!</P><P>Guru.</P></BODY></HTML> Thu, 25 Jan 2007 06:52:49 GMT gurdsing 2007-01-25T06:52:49Z Auth-Proxy feature of IOS firewall with TACACS+ https://community.cisco.com/t5/network-security/auth-proxy-feature-of-ios-firewall-with-tacacs/m-p/670148#M1031470 <P>hello,</P><P></P><P>can anybody tell me whether auth-proxy feature is supported by tacacs+, i mean i want to use tacacs+ as auth protocol and not radius.</P><P></P><P>although i configured the setup as mentioned in the below url.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/partner/products/ps6350/products_configuration_guide_chapter09186a00804ad9bc.html" target="_blank">http://www.cisco.com/en/US/partner/products/ps6350/products_configuration_guide_chapter09186a00804ad9bc.html</A></P><P></P><P>can anybdy help me.</P><P></P><P>regards</P><P>Manish</P> Mon, 11 Mar 2019 09:23:29 GMT https://community.cisco.com/t5/network-security/auth-proxy-feature-of-ios-firewall-with-tacacs/m-p/670148#M1031470 mashamje 2019-03-11T09:23:29Z Re: Auth-Proxy feature of IOS firewall with TACACS+ https://community.cisco.com/t5/network-security/auth-proxy-feature-of-ios-firewall-with-tacacs/m-p/670149#M1031471 <HTML><HEAD></HEAD><BODY><P>Hi Manish,</P><P></P><P>Yes, you can configure Auth-Proxy with tacacs+. What configuration help do you require? The document has all the steps to configure it.</P><P></P><P>Cheers!</P><P>Guru.</P></BODY></HTML> Thu, 25 Jan 2007 06:52:49 GMT https://community.cisco.com/t5/network-security/auth-proxy-feature-of-ios-firewall-with-tacacs/m-p/670149#M1031471 gurdsing 2007-01-25T06:52:49Z Re: Auth-Proxy feature of IOS firewall with TACACS+ https://community.cisco.com/t5/network-security/auth-proxy-feature-of-ios-firewall-with-tacacs/m-p/670150#M1031472 <HTML><HEAD></HEAD><BODY><P>Hello Guru,</P><P></P><P>i have done the same stuff which is mentioned in the document, but i m getting authentication and authorization pass in debugs of cisco. even after this i m not getting my connection through router i.e ACLs are not downloaded to router.</P><P></P><P>the same config works fine when i use radius instead of tacacs.</P><P></P><P>regards</P><P>Manish</P></BODY></HTML> Thu, 25 Jan 2007 07:01:31 GMT https://community.cisco.com/t5/network-security/auth-proxy-feature-of-ios-firewall-with-tacacs/m-p/670150#M1031472 mashamje 2007-01-25T07:01:31Z