topic pix515E startup problem in Network Security https://community.cisco.com/t5/network-security/pix515e-startup-problem/m-p/647411#M1031620 <P>I have a pix515E that was working fine. then it got in rommon a few days ago and now it shows nothing in hypertrm window except for that in the attachment. what is wrong with it and what can be done, can you tell?</P><P></P><P> </P><P></P> Mon, 11 Mar 2019 09:21:18 GMT himulalax 2019-03-11T09:21:18Z pix515E startup problem https://community.cisco.com/t5/network-security/pix515e-startup-problem/m-p/647411#M1031620 <P>I have a pix515E that was working fine. then it got in rommon a few days ago and now it shows nothing in hypertrm window except for that in the attachment. what is wrong with it and what can be done, can you tell?</P><P></P><P> </P><P></P> Mon, 11 Mar 2019 09:21:18 GMT https://community.cisco.com/t5/network-security/pix515e-startup-problem/m-p/647411#M1031620 himulalax 2019-03-11T09:21:18Z Re: pix515E startup problem https://community.cisco.com/t5/network-security/pix515e-startup-problem/m-p/647412#M1031622 <HTML><HEAD></HEAD><BODY><P>The issue may be dure Checksum error in file flash:/pix721.bin.No bootable image in flash due to a corrupted Flash memory</P><P>Complete these steps in order to erase the Flash memory:</P><P> 1. Backup the PIX Firewall configuration and issue a show version command to see the activation key contained.</P><P> 2. Reload the PIX Firewall and interrupt the boot sequence by pressing either the esc or break key. This takes you to monitor mode.</P><P> 3. Once in monitor mode, run the TFTP server with the image in the root directory of the TFTP server</P><P>copy the image to the Flash from the TFTP server.</P></BODY></HTML> Wed, 24 Jan 2007 19:20:42 GMT https://community.cisco.com/t5/network-security/pix515e-startup-problem/m-p/647412#M1031622 vmoopeung 2007-01-24T19:20:42Z