topic Re: Series 2 Devices are the in Network Security

Firepower supported devices

j.albos — Tue, 12 Mar 2019 12:55:33 GMT

There are differences in supported firepower functionality for series 2 and 3 devices. Is there a clear view of what devices are series 2 and what devices are series 3 ?

Series 2 Devices are the

Marvin Rhoads — Sat, 05 Mar 2016 15:00:56 GMT

Series 2 Devices are the older Sourcefire-branded appliances. They were all End of Sales back in 2012 or so.

They include the following models: 3D500, 3D1000, 3D2000, 3D2100, 3D2500, 3D3500, 3D4500, 3D6500.

All other dedicated NGIPS appliances can be considered Series 3.

(The ASA FirePOWER modules and brand new FirePOWER 9300 and 4000 series are in a separate class and neither Series 2 or 3.)

Re: Series 2 Devices are the

Sukhbir Singh — Wed, 03 Oct 2018 22:44:18 GMT

What about FireSight 3D7115 device? Is this considered Series 2 or Series 3 device ?

Re: Series 2 Devices are the

Marvin Rhoads — Thu, 04 Oct 2018 02:30:53 GMT

The 3D7115 is included as series 3 - "All other dedicated NGIPS appliances can be considered Series 3".

Re: Series 2 Devices are the

tnkurunziza — Thu, 25 Jul 2019 06:12:39 GMT

Hi All,

I have a CISCO ASA5545-x. I need to purchase the Firepower and smartnet features. I would like to know if these feautures need a Hardware module to be placed into the FW or if they need only SW to be loaded in the FW. Kindly let me know your idea about that. Your answer will be of high importance to me. Thank you in advance.

Re: Series 2 Devices are the

Marvin Rhoads — Thu, 25 Jul 2019 11:00:10 GMT

Your question has nothing to do with the original poster's inquiry.

Please post as a new discussion - it helps others who come after you to find relevant content more easily.