topic Hi Jorge, in Network Security

How to open .SH File for Firesight Management Center Virtual Appliance

Jorge Neyton Avila Pacheco — Tue, 12 Mar 2019 12:54:18 GMT

Hi Team,

I have downloaded the Firesight Management Center Virtual file but I can´t open it. The extension is ¨.SH¨ as you can see in fhe following information that I´ve obtained from Cisco.com web page:

Cisco FireSIGHT Management Center Patch
Sourcefire_3D_Defense_Center_S3_Patch-5.4.1.5-33.sh

19-JAN-2016

1980.92 MB

How can I decompress this .sh File in order to get the OVF File to create the VMWare virtual machine?

Thanks for your answer!

Neyton

Hi Jorge,

Pujita Patni — Thu, 18 Feb 2016 17:17:00 GMT

Hi Jorge,

What you have downloaded is the patch file that is applied on an existing system.

To install a new VM with Firesight Management Center you will need the installer file.

Looking at the version you downloaded, you will need the Sourcefire_Defense_Center_Virtual64_VMware-5.4.0-763.tar.gz file which can be found here:

https://software.cisco.com/download/release.html?mdfid=286259687&softwareid=286271056&release=SEU&relind=AVAILABLE&rellifecycle=&reltype=latest

Click on 5.4 in the left column to find this.

If you plan to install the latest version please use: Cisco_Firepower_Management_Center_VMware-6.0.0-1005.tar.gz which can be found in the same link by expanding 6.0 in the left column.

Thanks,

Pujita

Hi Pujita,

Jorge Neyton Avila Pacheco — Thu, 18 Feb 2016 17:28:16 GMT

Hi Pujita,

It doesn´t make sense because in the link you have provided me there isn´t a .TAR.GZ file.

Please check the attached file.

Thanks.

Neyton

Hi Jorge,

Pujita Patni — Thu, 18 Feb 2016 18:02:58 GMT

Hi Neyton

You will need to expand by clicking on 6.0 and choosing 6.0.0.0 or expanding 5.4 and choosing 5.4.0.

Attaching image for same.

Pujita

Excellent! I can see now

Jorge Neyton Avila Pacheco — Thu, 18 Feb 2016 18:04:27 GMT

Excellent! I can see now where has been the problem. I really apreciarte your help. 🙂

Have a nice day Sir!

Neyton

Hi,

Aastha Bhardwaj — Thu, 18 Feb 2016 18:04:44 GMT

Hi,

Check this : https://software.cisco.com/download/release.html?mdfid=286259687&flowid=72302&softwareid=286271056&release=Rules%20Updates&relind=AVAILABLE&rellifecycle=&reltype=latest

Now Under All releases > 5.4.0. There is a tar file which contains the ovf file as well.

To deploy it check : http://www.cisco.com/c/en/us/support/docs/security/firesight-management-center-virtual-appliance/118645-configure-firesight-00.html

Regards,

Aastha Bhardwaj

Rate if that helps!!!