topic Hi John, in Network Security

IPS Sourcefire Agent Problem

John — Tue, 12 Mar 2019 12:49:58 GMT

Hi Team,

We have encountered some error regarding on sourcefire agent.

Hi John,

Pujita Patni — Sun, 29 Nov 2015 17:03:34 GMT

Hi John,

Can you please refer the below document that talks about the minimum permission that are needed :

http://www.cisco.com/c/en/us/support/docs/security/firesight-management-center/118637-configure-firesight-00.html

Please confirm that you have the above configured.

Thanks,

Pujita

Hi,

Aastha Bhardwaj — Tue, 01 Dec 2015 01:09:22 GMT

Hi,

First change the name of the AD server to localhost and then check . Also check minimum pernissions as mentioned by Pujita.

The user with which you are logged in should be a part of Administartor group and there should be no firewall or any device that should block the communication between AD and user agent.

Regards,

Aastha Bhardwaj

Rate if that helps!!!