topic Re: Hi, in Network Security

re register key for a source fire module...

juancarlosmartinez — Tue, 12 Mar 2019 12:49:38 GMT

HI Guys.

I,m new with source fire I end reinstalling the sourcefire module soft becuase a ASA replacement on the active. I got the stanby ASA with source fire module running.

The previous network eng do not document the procedure, where can I found that key so I can re register the rebulit module.

Register a Device with a FireSIGHT Management Center: http://www.cisco.com/c/en/us/support/docs/security/firesight-management-center/118596-configure-firesight-00.html

thanks guys!!!!

Hi,

Aastha Bhardwaj — Wed, 25 Nov 2015 17:19:52 GMT

Hi,

>show managers

You can see the registration key in there.

Let me know if that is what you re looking for ?

Regards,

Aastha Bhardwaj

Rate if that helps!!!

Thanks Aastha,,,,

juancarlosmartinez — Wed, 25 Nov 2015 20:33:44 GMT

Thanks Aastha,,,,

have a good holidays.

Re: Hi,

azeemusman.mca@gmail.com — Tue, 05 Jun 2018 06:31:16 GMT

Hi Aashta,

The command which you have mentioned will display the status of the instance if it joined the FMC but its not giving the registration key what we have.

Could you please help us on that ?

> show managers
Type : Manager
Host : x.x.x.x
Registration : Completed

Regards,

Azeem Usman

Re: Hi,

Marvin Rhoads — Tue, 05 Jun 2018 10:59:46 GMT

Once configured, it's not stored in plain text. You can see the hashed value by inspecting the "reg_key" in sftunnel.conf. If the value matches at both ends you are good with respect to registration key.

Below are examples taken from an FTD and FMC respectively. (A Firepower service module stores its value similarly.)

admin@vftd-new:/etc/sf$ more sftunnel.conf | grep reg_key
reg_key 69c94e8a-92d2-11e7-b4ad-db36033706e7;
admin@vftd-new:/etc/sf$

admin@fmc:/etc/sf$ more sftunnel.conf | grep reg_key
reg_key 69c94e8a-92d2-11e7-b4ad-db36033706e7;
reg_key e46b9e00-b801-11e7-889d-d537e5bba995;
admin@fmc:/etc/sf$

Re: Hi,

azeemusman.mca@gmail.com — Mon, 02 Jul 2018 05:24:12 GMT

Thank you Marvin for the details.

It worked and I can see the Keys.

Regards,

Azeem Usman

Re: Hi,

Marvin Rhoads — Mon, 02 Jul 2018 11:23:44 GMT

You're welcome azeemusman.mca@gmail.com

Please rate my answer if it helped.