topic Pb with image upload in Network Security https://community.cisco.com/t5/network-security/pb-with-image-upload/m-p/704920#M1034862 <P>Hi,</P><P></P><P>I had a pb with one of my ASA 5520. the box lose the config file. then I erase completly the disk0 to have a clean disk0. </P><P></P><P>in ROMMON mode, if I upload the image to boot it's boot correctly but if i issued the command dir, there is no file on disk0. </P><P></P><P>Can Someone help.</P><P></P><P>thks</P> Mon, 11 Mar 2019 09:08:49 GMT cyakpovi 2019-03-11T09:08:49Z Pb with image upload https://community.cisco.com/t5/network-security/pb-with-image-upload/m-p/704920#M1034862 <P>Hi,</P><P></P><P>I had a pb with one of my ASA 5520. the box lose the config file. then I erase completly the disk0 to have a clean disk0. </P><P></P><P>in ROMMON mode, if I upload the image to boot it's boot correctly but if i issued the command dir, there is no file on disk0. </P><P></P><P>Can Someone help.</P><P></P><P>thks</P> Mon, 11 Mar 2019 09:08:49 GMT https://community.cisco.com/t5/network-security/pb-with-image-upload/m-p/704920#M1034862 cyakpovi 2019-03-11T09:08:49Z Re: Pb with image upload https://community.cisco.com/t5/network-security/pb-with-image-upload/m-p/704921#M1034863 <HTML><HEAD></HEAD><BODY><P>It might be a problem with IOS because sometimes OS mightnot hold the config file.So try upgrading the OS and check what happens.It might also be an issue with NVRAM not holding the configuration file.</P></BODY></HTML> Wed, 20 Dec 2006 14:30:55 GMT https://community.cisco.com/t5/network-security/pb-with-image-upload/m-p/704921#M1034863 smalkeric 2006-12-20T14:30:55Z