https://community.cisco.com/t5/network-security/csc-ssm-scan-services-reloading/m-p/614577#M1035804 <P>Cusotmer has an ASA 5520 running 7.2(1) with a CSC-SSM-20 module. The updates for the CSC module is set for 02:55 (note, this is am, not pm). In the syslogs, we are seeing the updates occur around this time as expected, but it also happened today in the middle of the afternoon. When this occurs, we lose internet for a couple of minutes. But, we have it configured to allow traffic to pass when the module is down, so I'm not sure why we lose internet connectivity during a reload of the module. No changes were made to the box to our knowledge and we've looked through all of the syslogs for anything related to updates. All we see are these 3 entries:</P><P></P><P>02:55:22: %ASA-1-505013: ASA-SSM-CSC-20 Module in slot 1, application reloading "CSC SSM", version "6.1 (Build#1519)" CSC SSM scan services are reloading because of a pattern file or configuration update</P><P></P><P>02:56:23: %ASA-1-505013: ASA-SSM-CSC-20 Module in slot 1, application reloading "CSC SSM", version "6.1 (Build#1519)" CSC SSM scan services are reloading because of a pattern file or configuration update</P><P></P><P>13:51:35: %ASA-1-505013: ASA-SSM-CSC-20 Module in slot 1, application reloading "CSC SSM", version "6.1 (Build#1519)" CSC SSM scan services are reloading because of a pattern file or configuration update</P><P></P><P>Any thoughts as to why the update would occur at 1:51pm, and why we would lose internet connectivity during this time?</P><P></P><P>Thanks,</P><P>Kevin</P> Mon, 11 Mar 2019 09:01:04 GMT kdamisch 2019-03-11T09:01:04Z https://community.cisco.com/t5/network-security/csc-ssm-scan-services-reloading/m-p/614577#M1035804 <P>Cusotmer has an ASA 5520 running 7.2(1) with a CSC-SSM-20 module. The updates for the CSC module is set for 02:55 (note, this is am, not pm). In the syslogs, we are seeing the updates occur around this time as expected, but it also happened today in the middle of the afternoon. When this occurs, we lose internet for a couple of minutes. But, we have it configured to allow traffic to pass when the module is down, so I'm not sure why we lose internet connectivity during a reload of the module. No changes were made to the box to our knowledge and we've looked through all of the syslogs for anything related to updates. All we see are these 3 entries:</P><P></P><P>02:55:22: %ASA-1-505013: ASA-SSM-CSC-20 Module in slot 1, application reloading "CSC SSM", version "6.1 (Build#1519)" CSC SSM scan services are reloading because of a pattern file or configuration update</P><P></P><P>02:56:23: %ASA-1-505013: ASA-SSM-CSC-20 Module in slot 1, application reloading "CSC SSM", version "6.1 (Build#1519)" CSC SSM scan services are reloading because of a pattern file or configuration update</P><P></P><P>13:51:35: %ASA-1-505013: ASA-SSM-CSC-20 Module in slot 1, application reloading "CSC SSM", version "6.1 (Build#1519)" CSC SSM scan services are reloading because of a pattern file or configuration update</P><P></P><P>Any thoughts as to why the update would occur at 1:51pm, and why we would lose internet connectivity during this time?</P><P></P><P>Thanks,</P><P>Kevin</P> Mon, 11 Mar 2019 09:01:04 GMT https://community.cisco.com/t5/network-security/csc-ssm-scan-services-reloading/m-p/614577#M1035804 kdamisch 2019-03-11T09:01:04Z https://community.cisco.com/t5/network-security/csc-ssm-scan-services-reloading/m-p/614578#M1035806 <HTML><HEAD></HEAD><BODY><P>some updates require a reboot of the module. thosse messages are just informational only. Do you have a failover setup?. If not that could be the resaon why there is an outage </P></BODY></HTML> Fri, 01 Dec 2006 23:03:16 GMT https://community.cisco.com/t5/network-security/csc-ssm-scan-services-reloading/m-p/614578#M1035806 vkapoor5 2006-12-01T23:03:16Z