topic FWSM in Network Security https://community.cisco.com/t5/network-security/fwsm/m-p/670312#M1036968 <P>how to nter in to MSFC, SUP, FW on 6513.</P> Mon, 11 Mar 2019 09:23:35 GMT aksher 2019-03-11T09:23:35Z FWSM https://community.cisco.com/t5/network-security/fwsm/m-p/670312#M1036968 <P>how to nter in to MSFC, SUP, FW on 6513.</P> Mon, 11 Mar 2019 09:23:35 GMT https://community.cisco.com/t5/network-security/fwsm/m-p/670312#M1036968 aksher 2019-03-11T09:23:35Z Re: FWSM https://community.cisco.com/t5/network-security/fwsm/m-p/670313#M1036980 <HTML><HEAD></HEAD><BODY><P>Hello aksher</P><P></P><P>from the 6500 chassis, you can use the session command to enter to the appropriate chassis... </P><P></P><P>session 4, where 4 is the module number... you need to have the correct modules on the correct slots !!!!</P><P></P><P>Hope this helps..all the best..</P><P></P><P>Raj</P></BODY></HTML> Tue, 23 Jan 2007 07:02:14 GMT https://community.cisco.com/t5/network-security/fwsm/m-p/670313#M1036980 sachinraja 2007-01-23T07:02:14Z Re: FWSM https://community.cisco.com/t5/network-security/fwsm/m-p/670314#M1036998 <HTML><HEAD></HEAD><BODY><P>Refernce:</P><P><A class="jive-link-custom" href="http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_2_3/fwsm_cfg/sysmgmt.htm" target="_blank">http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_2_3/fwsm_cfg/sysmgmt.htm</A></P><P></P><P>Session into the FWSM using the command appropriate for your switch operating system:</P><P></P><P>?Cisco IOS software</P><P>Router# session slot number processor 1</P><P></P><P></P><P>?Catalyst operating system software</P><P>Console&gt; (enable) session module_number</P><P></P><P>sincerely</P><P>Patrick</P><P></P></BODY></HTML> Tue, 23 Jan 2007 14:42:31 GMT https://community.cisco.com/t5/network-security/fwsm/m-p/670314#M1036998 Patrick Iseli 2007-01-23T14:42:31Z