topic Is the use of the Firepower service mandatory? in Network Security

Is the use of the Firepower service mandatory?

Coutinho10 — Thu, 11 May 2017 07:24:29 GMT

We just bought the ASA 5506-X with FirePower (ASA5506-K9). I migrated a config from our trusty 5505 to the new device and it's running just fine. I didn't bother with Firepower, but I did notice this module is up. Just wondering: Do I need to do anything with it if the 'basic' ASA functionality suffices? Or am I obliged to buy a license anyway? Should I disable the module if I choose not to use it?

Thanks in advance for your answers!

Hello Coutinho,

Jetsy Mathew — Thu, 11 May 2017 07:35:09 GMT

Hello Coutinho,

If you want inspect the traffic from ASA via Firepower then you have to do the following configs to redirect the traffic towards the Firepower.

http://www.cisco.com/c/en/us/support/docs/security/asa-firepower-services/118644-configure-firepower-00.html

But to use the Firepower policies and mange the same , you should have the base license which Protect and Control . Without license you wont be able to manage the Firepower policies. More about the License info as follows.

http://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa-firepower-module-user-guide-v541/Licensing.html

More about the benefits of Firepower as follows.

https://www.cisco.com/c/dam/en/us/products/collateral/security/asa-firepower-services/at-a-glance-c45-732426.pdf

There are several features like Malware inspection and URL filtering also available with the Firepower services.

Rate if this helps.

Regards

Jetsy

In addition to what Jetsy

Marvin Rhoads — Thu, 11 May 2017 07:41:19 GMT

In addition to what Jetsy said, leaving the module installed will not affect the ASA code in any way.

If you're OCD about it, you can uninstall it. If you're not using it now, you'd probably want to re-image it anyway when or if you ever get around to wanting to use it.

If you're simply relying on your ASA though for security, you are neglecting to protect against most current threats. Malware, phishing attacks, malicious URLs etc. are all things that the FirePOWER service module can help protect against.

Hi Jetsy,

Coutinho10 — Thu, 11 May 2017 07:45:01 GMT

Hi Jetsy,

Thanks for your answer. Maybe I didn't make myself clear: I don't want to use Firepower, but the module is running. So, is it ok to leave it alone if the 'basic' ASA functionality suffices? Or am I obliged to buy a license anyway? Should I disable the module if I choose not to use it?

Thanks again.

Hi Marvin,

Coutinho10 — Thu, 11 May 2017 07:56:39 GMT

Hi Marvin,

Thanks, good to know that just leaving FP be won't have any negative impact on basic ASA functionality. Right now we are relying on another solution to protect us against malware etc., but who knows, maybe this will change over time.