topic Re: FTD Throughput in Network Security

FTD Throughput

adamgibs7 — Fri, 21 Feb 2020 16:47:22 GMT

Dears

FTD datasheet doesn't provide much detail of the below can anybody provide me this information for these FTD 2140, 4110, 4120

Firewalling throughput

The firewall throughput without AVC only firewalling
When SSL inspection is enabled than what is the throughput

VPN Throughput

What is SSL VPN throughput.

IPS

what is the throughput when IPS is enabled with http traffic and with MIX traffic.

Threat Protection Throughput ( what is enabled in threat protection)

Thanks

Re: FTD Throughput

balaji.bandi — Fri, 08 Feb 2019 22:14:12 GMT

May some stastics help you - in competitive point of view.

https://www.fortinet.com/content/dam/fortinet/assets/analyst-reports/nss-labs-2018-ngfw-comparative-report-performance.pdf

Also attached some NGFW point of view.

Re: FTD Throughput

gbekmezi-DD — Fri, 08 Feb 2019 22:28:18 GMT

That’s hilarious. Cisco, along with a number of other security product manufacturers have abandoned NSS due to their broken testing methodology, this test last year was the last one Cisco is planning on participating in. As for your specific questions, I could provide you those values, but you should be able to reach out to either your Cisco account team or the partner SE you are working with and they could get you answers to these questions.

George

Re: FTD Throughput

toddlammle — Sun, 24 Feb 2019 13:29:21 GMT

yes, there is an answer to this

if you have a CCO login, go here and this is what your cisco reps use:

https://ngfwpe.cisco.com/