ASA firepower connectivity without using switch

rahul88 — Fri, 21 Feb 2020 15:37:38 GMT

Hi Can any one help me to implement Below scenario :

I am having ASA 5508X box with firepower, I have connected interface Gi1/1 to MGMT PC for ASDM access interface Gi1/4 with interface MGMT1/1 for Firepower connectivity and interface Gi1/1 and Gi1/4 are in bridge-group 1. Below are the interface configuration:

GigabitEthernet1/1
nameifameif outside
security-level 0
bridge-group 1

------------------------------------------------

GigabitEthernet1/4
nameif outside1
security-level 0
bridge-group 1

-------------------------------------------------

managment1/1

no nameif

no security-level

--------------------------------------------------

interface bvi 1
security-level 0
ip address 10.222.0.5 255.255.255.0

-------------------------------------------------

Firepower management ip 10.222.0.6 255.255.255.0

Firepower Default-Gateway- 10.222.0.5

--------------------------------------------------

ASA is in router mode

--------------------------------------------------

with the above configuration and MGMT ip 10.222.0.5 i am able to access firewall using ASDM but not able to access Firepower in ASDM. Now, My question is :

i- can we achive above scenario without using an L2 switch?

ii- Does this scenario can be only achived in transparent mode?

topic ASA firepower connectivity without using switch in Network Security

ASA firepower connectivity without using switch

Re: ASA firepower connectivity without using switch