topic Re: Config Voip service in Network Security

Config Voip service

wexnet_co — Fri, 21 Feb 2020 16:06:09 GMT

hello support

i need assistance

need your assiqtence to config NAT from my ip public 41.XXX.XXX.XX /28

send traffic tout 10.54.X.X

Re: Config Voip service

Dennis Mink — Wed, 15 Aug 2018 01:51:24 GMT

sure we can help. what device have you got?

Re: Config Voip service

wexnet_co — Thu, 16 Aug 2018 12:37:17 GMT

I have a config in Voip
I want people outside can pass on my gataway by public IP address 41.190.XXX.XX
but when i configure my local ip 192.168.1.XXX the local call goes on but the voice is not good can you please help me

Re: Config Voip service

wexnet_co — Thu, 16 Aug 2018 12:37:52 GMT

Re: Config Voip service

Dennis Mink — Fri, 17 Aug 2018 00:46:05 GMT

you will need to configure NAT from your poublic IP address to your local gateway ip address, if this is sip forward on port 5060 and 5061. and turn on sip inspection to allow rtp to your inside segment as well.

also add an acl to allow 5060 and 5061