SNMP trap configuration

bmak — Fri, 21 Feb 2020 17:31:21 GMT

Hi,

I am attempting to configure SNMP traps for Power Supply failure, Critical CPU temperature, Fan failure on my ASA firewall.

When I enter the command "show run all snmp-server" , I get this output:

"no snmp-server enable traps entity config-change fru-insert fru-remove fan-failure power-supply power-supply-presence cpu-temperature chassis-temperature power-supply-temperature chassis-fan-failure"

which shows the firewall has the ability to. But when I attempt to enter the command, the firewall does not accept it and it also does not show them as an option when I use the "?".

The firewall is an ASA5520, running on OS; 9.1(7)23.

Has anyone come across this before, if you have how did you resolve it or did you have to upgrade the OS?

Thank you.

Re: SNMP trap configuration

balaji.bandi — Tue, 24 Sep 2019 20:27:18 GMT

here is the SNMP config guide for reference :

https://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/monitor_snmp.html#99414

topic SNMP trap configuration in Network Security

SNMP trap configuration

Re: SNMP trap configuration