HUM polling problem

gregory.aniorte — Fri, 21 Feb 2020 10:58:53 GMT

I've got a problem in HUM as I can't poll 5 devices. When I want to configure polling instances on those 5 switches (3500XL, 3550 and 3560 in snmp v2 and v3), there is nothing to poll.

snmpwalk is working fine and all other module are working fine on those devices.

It is doing that since I've restored LMS on my new server.

I'm using LM 3.1 with averything up to date.

I've got those errors in the upm_process.log

============================

Aug 25 15:16:01 EDT 2008 ],ERROR,[Thread-18],com.cisco.nm.upm.dal.DeviceAccess,initCredentials,130,SNMP credenttilas are not available with device manager.

Aug 25 15:15:19 EDT 2008 ],ERROR,[SNMPThrPool149],com.cisco.nm.upm.pollermgmt.instret.InstanceQueryRH,processSnmpPollTimeout,244,got the response processSnmpPollTimeout for device:10.16.0.22

[ Aug 25 15:15:19 EDT 2008 ],ERROR,[SNMPThrPool157],com.cisco.nm.upm.pollermgmt.instret.InstanceQueryRH,processSnmpPollTimeout,244,got the response processSnmpPollTimeout for device:10.16.0.25

[ Aug 25 15:15:19 EDT 2008 ],ERROR,[SNMPThrPool152],com.cisco.nm.upm.pollermgmt.instret.InstanceQueryRH,processSnmpPollTimeout,244,got the response processSnmpPollTimeout for device:10.16.0.29

[ Aug 25 15:15:19 EDT 2008 ],INFO ,[SNMPThrPool149],com.cisco.nm.upm.dal.DeviceAccess,changeToV1FromV2,816,SNMP Version is -1. So returning false.

[ Aug 25 15:15:19 EDT 2008 ],INFO ,[SNMPThrPool157],com.cisco.nm.upm.dal.DeviceAccess,changeToV1FromV2,816,SNMP Version is -1. So returning false.

[ Aug 25 15:15:19 EDT 2008 ],INFO ,[SNMPThrPool152],com.cisco.nm.upm.dal.DeviceAccess,changeToV1FromV2,816,SNMP Version is -1. So returning false.

====================================

Anyone ?

Thanks,

Re: HUM polling problem

Farrukh Haroon — Tue, 26 Aug 2008 01:45:17 GMT

Apparently your credentials seem to be wrong. Try re-adding them.

Regards

Farrukh

topic HUM polling problem in Network Security

HUM polling problem

Re: HUM polling problem