topic Re: ICMP Translation in Network Security https://community.cisco.com/t5/network-security/icmp-translation/m-p/723604#M1054235 <HTML><HEAD></HEAD><BODY><P>Use the Static NAT and allow ICMP trafic using acces-list.</P><P></P><P>Refer this link for commands:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093f31.shtml" target="_blank">http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093f31.shtml</A></P><P></P><P></P></BODY></HTML> Thu, 29 Mar 2007 19:47:03 GMT bwalchez 2007-03-29T19:47:03Z ICMP Translation https://community.cisco.com/t5/network-security/icmp-translation/m-p/723603#M1054231 <P>Hi, We have a LAN network who can connect to the internet via a cisco 1600, our Web server has ip 192.168.1.130 and our public IP something like 196.192.xx.xx. To access the Web server from the outside is easy : I use ip nat on my cisco, but if I want that my ping request go to web server what I can do ? In other words : I want that my web server reply to my ping commands from the outside (not the cisco). Can I use NAT for this ? which command should I use ?</P> Fri, 21 Feb 2020 09:27:32 GMT https://community.cisco.com/t5/network-security/icmp-translation/m-p/723603#M1054231 phill_china 2020-02-21T09:27:32Z Re: ICMP Translation https://community.cisco.com/t5/network-security/icmp-translation/m-p/723604#M1054235 <HTML><HEAD></HEAD><BODY><P>Use the Static NAT and allow ICMP trafic using acces-list.</P><P></P><P>Refer this link for commands:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093f31.shtml" target="_blank">http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093f31.shtml</A></P><P></P><P></P></BODY></HTML> Thu, 29 Mar 2007 19:47:03 GMT https://community.cisco.com/t5/network-security/icmp-translation/m-p/723604#M1054235 bwalchez 2007-03-29T19:47:03Z