topic Re: Automatic Login with Cisco VPN Client in Network Security https://community.cisco.com/t5/network-security/automatic-login-with-cisco-vpn-client/m-p/618065#M1054708 <HTML><HEAD></HEAD><BODY><P>To configure auto initiation, you must add the following keywords and values in the [Main] section of the vpnclient.ini global profile file:</P><P></P><P>AutoInitiationEnable?enables or disables auto initiation. To enable auto initiation, enter 1. To disable it, enter 0.</P><P></P><P>AutoInitiationRetryInterval?specifies the number of minutes to wait before retrying an auto initiation connection. The range is 1 to 10 minutes or 5 to 600 seconds. If you do not include this parameter in the file, the default retry interval is one minute.</P><P></P><P>AutoInitiationRetryIntervalType?specifies whether the retry AutoInitiationRetryInterval parameter is displayed in minutes or seconds. The default is minutes.</P><P></P><P>AutoInitiationList?provides a series of section names, each of which contains a network address, a subnet mask, a connection entry name, and optionally, a connect flag. You can include a maximum of 64 section (network) entries</P></BODY></HTML> Fri, 20 Oct 2006 22:39:10 GMT bstremp 2006-10-20T22:39:10Z Automatic Login with Cisco VPN Client https://community.cisco.com/t5/network-security/automatic-login-with-cisco-vpn-client/m-p/618064#M1054699 <P>I'm planning a small VPN network with about 20 remote Windows XP clients. These machines will be unattended, and I need them to automatically establish and maintain the VPN connection. I have not used the Cisco VPN Client before, so I am very curious about how it works. Can it be managed like a Windows Dial-up connection?</P> Fri, 21 Feb 2020 09:14:47 GMT https://community.cisco.com/t5/network-security/automatic-login-with-cisco-vpn-client/m-p/618064#M1054699 jesselane 2020-02-21T09:14:47Z Re: Automatic Login with Cisco VPN Client https://community.cisco.com/t5/network-security/automatic-login-with-cisco-vpn-client/m-p/618065#M1054708 <HTML><HEAD></HEAD><BODY><P>To configure auto initiation, you must add the following keywords and values in the [Main] section of the vpnclient.ini global profile file:</P><P></P><P>AutoInitiationEnable?enables or disables auto initiation. To enable auto initiation, enter 1. To disable it, enter 0.</P><P></P><P>AutoInitiationRetryInterval?specifies the number of minutes to wait before retrying an auto initiation connection. The range is 1 to 10 minutes or 5 to 600 seconds. If you do not include this parameter in the file, the default retry interval is one minute.</P><P></P><P>AutoInitiationRetryIntervalType?specifies whether the retry AutoInitiationRetryInterval parameter is displayed in minutes or seconds. The default is minutes.</P><P></P><P>AutoInitiationList?provides a series of section names, each of which contains a network address, a subnet mask, a connection entry name, and optionally, a connect flag. You can include a maximum of 64 section (network) entries</P></BODY></HTML> Fri, 20 Oct 2006 22:39:10 GMT https://community.cisco.com/t5/network-security/automatic-login-with-cisco-vpn-client/m-p/618065#M1054708 bstremp 2006-10-20T22:39:10Z