topic Re: bulk encryption over multipoint gre in Network Security https://community.cisco.com/t5/network-security/bulk-encryption-over-multipoint-gre/m-p/570880#M1054838 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>Have you put all the connected subnet in your routing protocol network definition (I hope)?</P><P></P><P>Which routing protocol are you using ?</P></BODY></HTML> Thu, 31 Aug 2006 11:45:11 GMT martindesrosiers 2006-08-31T11:45:11Z bulk encryption over multipoint gre https://community.cisco.com/t5/network-security/bulk-encryption-over-multipoint-gre/m-p/570879#M1054837 <P>I am in the army and ran into a problem when trying to configure multipoint gre tunnels using bulk encryption devices at each end. I get the status as being up/up on both the remote and hub routers, but no routing updates are being passed between the two. I am using nhrp but not the crypto policy (bulk encryption). If I assign static routes to the distant ends, I can ping the remote router's address, but cannot ping the network behind it. I know the answer is something simple, I'm just tired of looking at it today. Help??</P> Fri, 21 Feb 2020 09:08:25 GMT https://community.cisco.com/t5/network-security/bulk-encryption-over-multipoint-gre/m-p/570879#M1054837 reddingaq 2020-02-21T09:08:25Z Re: bulk encryption over multipoint gre https://community.cisco.com/t5/network-security/bulk-encryption-over-multipoint-gre/m-p/570880#M1054838 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>Have you put all the connected subnet in your routing protocol network definition (I hope)?</P><P></P><P>Which routing protocol are you using ?</P></BODY></HTML> Thu, 31 Aug 2006 11:45:11 GMT https://community.cisco.com/t5/network-security/bulk-encryption-over-multipoint-gre/m-p/570880#M1054838 martindesrosiers 2006-08-31T11:45:11Z