topic VPN connection issue after PIX code upgrade in Network Security

VPN connection issue after PIX code upgrade

cjrchoi11 — Fri, 21 Feb 2020 08:33:45 GMT

I upgraded the PIX code and since the VPN connection starting problem.

PIX1=6.3(1) --> upgrade to 6.3(5)

PIX2=6.3(3) --> stay. not upgrade.

I have three networks in the ACL but only one is working but the other two have a pattern that drop the connection 20sec for every 30sec. verified with PING command.

might be code upgrade the PIX2 as a next step but problem is I cannot access the box. I heard the code 6.3(3) has a problem. Any known issue regrards this symptom?

Thanks in advance,

Re: VPN connection issue after PIX code upgrade

jackko — Thu, 01 Dec 2005 22:32:11 GMT

please post the config with public ip masked.

Re: VPN connection issue after PIX code upgrade

m.sir — Sat, 31 Dec 2005 15:07:45 GMT

try on PIX command

isakmp keepalive 10 2

Its used for Dead Peer Detection