topic Re: QoS and Cisco 831 - Problem with Policy-Map command in Network Security https://community.cisco.com/t5/network-security/qos-and-cisco-831-problem-with-policy-map-command/m-p/404657#M1055709 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>do find the ios file names and the DRAM,FLASH requirement to have them loaded in your box.</P><P></P><P></P><P> 64 12 c831-k9o3sy6-mz.12.4-2.T1 </P><P> 64 12 c831-k9o3sy6-mz.12.4-5 </P><P> 48 12 c831-k9o3sy6-mz.12.3-11.YS1 </P><P> 48 12 c831-k9o3sy6-mz.12.3-11.YK2 </P><P> 48 12 c831-k9o3sy6-mz.12.3-8.YG3 </P><P> 48 12 c831-k9o3sy6-mz.12.3-8.YA1 </P><P> 48 12 c831-k9o3sy6-mz.12.3-7.XR6 </P><P> 48 12 c831-k9o3sy6-mz.12.3-4.XG1 </P><P> 64 12 c831-k9o3sy6-mz.12.3-14.T4 </P><P></P><P>I feel you are planning to have the qos configs on vpn tunnels which you are having with your locations at present.</P><P></P><P>To have QOS functionality enabled on the VPN tunnels too you need to have qos pre-classify command coded under the tunnel or crypto map configs.</P><P></P><P>regds</P><P></P></BODY></HTML> Fri, 14 Oct 2005 05:30:47 GMT spremkumar 2005-10-14T05:30:47Z QoS and Cisco 831 - Problem with Policy-Map command https://community.cisco.com/t5/network-security/qos-and-cisco-831-problem-with-policy-map-command/m-p/404656#M1055706 <P>I am trying to set up QoS on a Cisco 831 router. I have two VPN tunnels (ipsec) on the router. It appears the Policy-Map command is not supported on my router. My IOS version is 12.3(2)XC2 using the image file c831-k9o3y6-mz.123-2.XC2.bin. Any suggestions on what I should do. BTW, this is currently in a testing environment.</P><P></P><P>Reid Lauderman</P> Fri, 21 Feb 2020 08:28:04 GMT https://community.cisco.com/t5/network-security/qos-and-cisco-831-problem-with-policy-map-command/m-p/404656#M1055706 hajoca 2020-02-21T08:28:04Z Re: QoS and Cisco 831 - Problem with Policy-Map command https://community.cisco.com/t5/network-security/qos-and-cisco-831-problem-with-policy-map-command/m-p/404657#M1055709 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>do find the ios file names and the DRAM,FLASH requirement to have them loaded in your box.</P><P></P><P></P><P> 64 12 c831-k9o3sy6-mz.12.4-2.T1 </P><P> 64 12 c831-k9o3sy6-mz.12.4-5 </P><P> 48 12 c831-k9o3sy6-mz.12.3-11.YS1 </P><P> 48 12 c831-k9o3sy6-mz.12.3-11.YK2 </P><P> 48 12 c831-k9o3sy6-mz.12.3-8.YG3 </P><P> 48 12 c831-k9o3sy6-mz.12.3-8.YA1 </P><P> 48 12 c831-k9o3sy6-mz.12.3-7.XR6 </P><P> 48 12 c831-k9o3sy6-mz.12.3-4.XG1 </P><P> 64 12 c831-k9o3sy6-mz.12.3-14.T4 </P><P></P><P>I feel you are planning to have the qos configs on vpn tunnels which you are having with your locations at present.</P><P></P><P>To have QOS functionality enabled on the VPN tunnels too you need to have qos pre-classify command coded under the tunnel or crypto map configs.</P><P></P><P>regds</P><P></P></BODY></HTML> Fri, 14 Oct 2005 05:30:47 GMT https://community.cisco.com/t5/network-security/qos-and-cisco-831-problem-with-policy-map-command/m-p/404657#M1055709 spremkumar 2005-10-14T05:30:47Z