topic snmp setting. in Network Security https://community.cisco.com/t5/network-security/snmp-setting/m-p/454433#M1055876 <P>Good day,</P><P></P><P>Which kind of configuration can help us to manage the folowing parameter with solarwind :</P><P></P><P>-bandwith use per ip address, per port</P><P>-number of packet retransmit</P><P></P><P>I have a cisco router 2600 , ios version 12.2 and a computer equiped by a solarwind software.</P><P></P><P>Please, is somebody can provide a good configuration to me ?</P><P></P><P>Best regards.</P><P></P><P></P> Fri, 21 Feb 2020 08:22:08 GMT stephtchoko 2020-02-21T08:22:08Z snmp setting. https://community.cisco.com/t5/network-security/snmp-setting/m-p/454433#M1055876 <P>Good day,</P><P></P><P>Which kind of configuration can help us to manage the folowing parameter with solarwind :</P><P></P><P>-bandwith use per ip address, per port</P><P>-number of packet retransmit</P><P></P><P>I have a cisco router 2600 , ios version 12.2 and a computer equiped by a solarwind software.</P><P></P><P>Please, is somebody can provide a good configuration to me ?</P><P></P><P>Best regards.</P><P></P><P></P> Fri, 21 Feb 2020 08:22:08 GMT https://community.cisco.com/t5/network-security/snmp-setting/m-p/454433#M1055876 stephtchoko 2020-02-21T08:22:08Z Re: snmp setting. https://community.cisco.com/t5/network-security/snmp-setting/m-p/454434#M1055883 <HTML><HEAD></HEAD><BODY><P>How you calculate use depends on how data is presented for what you want to measure. Interface use is the primary measure used for network use. Use this formulas, based on whether the connection you measure is half-duplex or full-duplex.</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a008009496e.shtml" target="_blank">http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a008009496e.shtml</A></P></BODY></HTML> Thu, 08 Sep 2005 17:37:57 GMT https://community.cisco.com/t5/network-security/snmp-setting/m-p/454434#M1055883 b.hsu 2005-09-08T17:37:57Z