Cisco Works LMS 2.5 Device Discovery issue

daniel.cleary — Fri, 21 Feb 2020 08:22:56 GMT

Hi I have upgraded LMS 2.2 to 2.5 recently. We decided to remove all the old devices as there were inconsistencies, and do a device discovery. We have approx 1500 devices to discover.

My issue is:

When I ran device discovery it never finished (still running). I then raised a TAC case to find out what was going on.

I was told to modify a file named DeviceDiscovery.properties, change DeviceDiscovery.status=Running to DeviceDiscovery.status=idle and then restart the services.

This all worked fine I went into Campus Manager Admin and device discovery was idle. I then started device discovery and I got a message.

Device Discovery already in progress.

Does anyone know of anythong else I can do?

We had already lost confidence in this product and were told 2.5 was much better than 2.2. Not off to a good start.

Re: Cisco Works LMS 2.5 Device Discovery issue

nhabib — Sat, 10 Sep 2005 20:09:30 GMT

You might be running into bug id CSCsb21408:

LMS 2.5 Device Discovery remains stuck - does not go to Idle

Your DeviceDiscovery.properties file is probably corrupt

topic Re: Cisco Works LMS 2.5 Device Discovery issue in Network Security

Cisco Works LMS 2.5 Device Discovery issue

Re: Cisco Works LMS 2.5 Device Discovery issue