topic Re: L2TPv3 tunnel-marking in Network Security https://community.cisco.com/t5/network-security/l2tpv3-tunnel-marking/m-p/383481#M1057207 <HTML><HEAD></HEAD><BODY><P>Sorry for the typo above.</P><P></P><P>The 2 commands available are:</P><P></P><P>set-dscp-transmit which I assume marks the original IP packet</P><P>set-dscp-tunnel-transmit which I assume marks the new outer IP Header provide as part of the L2TPv3 encapsulation process.</P><P></P><P>Ginge</P></BODY></HTML> Tue, 08 Feb 2005 12:24:36 GMT ginge.evans 2005-02-08T12:24:36Z L2TPv3 tunnel-marking https://community.cisco.com/t5/network-security/l2tpv3-tunnel-marking/m-p/383480#M1057206 <P>I'm trying to map 802.1p CoS to DSCP when policing the ingress of an L2TPv3 tunnel endpoint interface.</P><P></P><P>2 commands exist in documentation.</P><P></P><P>set-dscp-transmit or .</P><P></P><P>However using 12.3(8)T4 on a 7206 doesn't give me the set-dscp-tunnel-transmit so i can't appear to be able to mark the new IP header with a DSCP bit and ensure that QoS is applired across the network.</P><P></P><P>Has anyone done this? </P><P></P><P>Ginge</P> Fri, 21 Feb 2020 07:55:25 GMT https://community.cisco.com/t5/network-security/l2tpv3-tunnel-marking/m-p/383480#M1057206 ginge.evans 2020-02-21T07:55:25Z Re: L2TPv3 tunnel-marking https://community.cisco.com/t5/network-security/l2tpv3-tunnel-marking/m-p/383481#M1057207 <HTML><HEAD></HEAD><BODY><P>Sorry for the typo above.</P><P></P><P>The 2 commands available are:</P><P></P><P>set-dscp-transmit which I assume marks the original IP packet</P><P>set-dscp-tunnel-transmit which I assume marks the new outer IP Header provide as part of the L2TPv3 encapsulation process.</P><P></P><P>Ginge</P></BODY></HTML> Tue, 08 Feb 2005 12:24:36 GMT https://community.cisco.com/t5/network-security/l2tpv3-tunnel-marking/m-p/383481#M1057207 ginge.evans 2005-02-08T12:24:36Z